T3 60-1,450cc injectors,300hp,can i get that hp range w/those injectors?
#4
Honda-Tech Member
Join Date: Nov 2002
Location: Mount Laurel NJ
Posts: 619
Likes: 0
Received 0 Likes
on
0 Posts
Re: T3 60-1,450cc injectors,300hp,can i get that hp range w/those injectors? (HT Chaplin)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by HT Chaplin »</TD></TR><TR><TD CLASS="quote">just make sure you have a good fuel pump and you should be ok</TD></TR></TABLE>
and make sure you have high fuel pressure
and make sure you have high fuel pressure
#7
Honda-Tech Member
Join Date: Jun 2004
Location: Dutchess County,, NY
Posts: 2,887
Likes: 0
Received 0 Likes
on
0 Posts
Re: T3 60-1,450cc injectors,300hp,can i get that hp range w/those injectors? (blackeg)
i was using rc 440's w/ 255lph and stk fuel psi reg/rail
made 303 whp injectors were at 80% duty
so to answer your question, YES..unless you plan on making more power down the road....the 440's should be fine
made 303 whp injectors were at 80% duty
so to answer your question, YES..unless you plan on making more power down the road....the 440's should be fine
Trending Topics
#8
Honda-Tech Member
Join Date: Feb 2003
Location: schooling kids in ny, usa
Posts: 9,813
Likes: 0
Received 9 Likes
on
9 Posts
Re: T3 60-1,450cc injectors,300hp,can i get that hp range w/those injectors? (12SEC CIV)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by 12SEC CIV »</TD></TR><TR><TD CLASS="quote">i was using rc 440's w/ 255lph and stk fuel psi reg/rail
made 303 whp injectors were at 80% duty
so to answer your question, YES..unless you plan on making more power down the road....the 440's should be fine</TD></TR></TABLE>
ah thank god good to know, cause im at like 11 psi on 450's and had them pinned to be like right at 100%..
made 303 whp injectors were at 80% duty
so to answer your question, YES..unless you plan on making more power down the road....the 440's should be fine</TD></TR></TABLE>
ah thank god good to know, cause im at like 11 psi on 450's and had them pinned to be like right at 100%..
#9
Honda-Tech Member
Join Date: Nov 2002
Location: Mount Laurel NJ
Posts: 619
Likes: 0
Received 0 Likes
on
0 Posts
Re: T3 60-1,450cc injectors,300hp,can i get that hp range w/those injectors? (blackeg)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by blackeg »</TD></TR><TR><TD CLASS="quote">50-60 psi should keep you safe. i would get a walbro though.</TD></TR></TABLE>
Thread
Thread Starter
Forum
Replies
Last Post
Dammit_Dan_954
Forced Induction
19
02-04-2004 06:33 PM