T25 turbo wastegate actuator arm adjustment question
#1
Honda-Tech Member
Thread Starter
Join Date: Mar 2009
Posts: 221
Likes: 0
Received 0 Likes
on
0 Posts
T25 turbo wastegate actuator arm adjustment question
So last night i messed around with my actuator. I was working on it from the top,not underneath the car. Im right handed so i turned the nut on actuator left but move it moved rightward on the rod.I just turned the nut on the actuator a bit more and noticed that im increaing the length of the rod.....i made a mark on the rod yesterday before i turned it. Therefore im decreasing the boost.....Anyone has an idea how to shorten the length of that actuator rod without removing anything off the car? I read in this thread if i want to shorten the length of that rod i have to take of the c-clip where holds the end of that rod and turn that swivel and bracket...
[HowTo] Wastegate Actuator Arm Adjustment - GenCoupe.com Forums
that is not so convenient because i will be constantly jacking the car up and remove the turbo downpipe to reach that area
[HowTo] Wastegate Actuator Arm Adjustment - GenCoupe.com Forums
that is not so convenient because i will be constantly jacking the car up and remove the turbo downpipe to reach that area
#3
Honda-Tech Member
Re: T25 turbo wastegate actuator arm adjustment question
Your gonna have to take it off in order to spin the threaded arm part. Then lock it into place with the nut.
Thread
Thread Starter
Forum
Replies
Last Post