Stroked B16 w/ GT35R turbo
#1
Junior Member
Thread Starter
Join Date: Mar 2010
Location: Valdese, NC
Posts: 10
Likes: 0
Received 0 Likes
on
0 Posts
Stroked B16 w/ GT35R turbo
Hi new to this site. I just picked up a RHD civic hatch with a stroked B16 and a GT35R turbo setup. The car was tuned on race gas and made 590hp to the wheels. It has a 3'' exhaust running about halfway back under the car and it turns down. It is very loud being a str. pipe like it is. My question is I am gonna get it retuned on pump gas and would like to put an exhaust on it to quiten it down but do not want to restrict it. Any suggestions on something I can do to make it quite. I cant stand the noise anymore I would rather hear the turbo spool.
#5
Junior Member
Thread Starter
Join Date: Mar 2010
Location: Valdese, NC
Posts: 10
Likes: 0
Received 0 Likes
on
0 Posts
Re: Stroked B16 w/ GT35R turbo
Thanks for the info. I will look into that. What about the cat since I dont have one now will I need to get a good aftermarket one or just weld a flange on for the exhaust to bolt to and run it back.
Thread
Thread Starter
Forum
Replies
Last Post