Sneak preview of whats to come from Bullseye Power!!!
06-26-2008, 05:32 PM
#1
Honda-Tech Member
Thread Starter
Join Date: Nov 2001
Location: Alabama, us
Posts: 10,759
Likes: 0
Received 0 Likes
on
0 Posts
Sneak preview of whats to come from Bullseye Power!!!
With all the rule changes in racing and the need for more advanced compressor designs, we have decided to raise the bar on ourselves. We already have some of the best compressor designs in the world thanks to Borg Warner.
With our new compressor design software and cnc programming software we can better match turbocharger compressors to the racing rules and power needs of many different power plants used in racing today.
Here is a sneak peak at what we have been up to.
http://www.youtube.com/watch?v=zzfQcHYQH5I
With our new compressor design software and cnc programming software we can better match turbocharger compressors to the racing rules and power needs of many different power plants used in racing today.
Here is a sneak peak at what we have been up to.
http://www.youtube.com/watch?v=zzfQcHYQH5I
06-26-2008, 05:40 PM
#4
Honda-Tech Member
Join Date: Apr 2003
Location: Louisville, KY, 40222
Posts: 1,679
Likes: 0
Received 0 Likes
on
0 Posts
Re: Sneak preview of whats to come from Bullseye Power!!! (turbodano)
That is pretty freaking awesome. As an engineer I can really appreciate that work. Keep it up. 
06-26-2008, 05:47 PM
#6
Junior Member
Join Date: Jun 2004
Location: Coquitlam., BC., Can
Posts: 486
Likes: 0
Received 0 Likes
on
0 Posts
Re: Sneak preview of whats to come from Bullseye Power!!! (turbodano)
will it be available at a reasonable cost to the average consumer?
Looks good, saw a billet wheel at work once, looks insane
Looks good, saw a billet wheel at work once, looks insane
06-26-2008, 06:08 PM
#7
Honda-Tech Member
Thread Starter
Join Date: Nov 2001
Location: Alabama, us
Posts: 10,759
Likes: 0
Received 0 Likes
on
0 Posts
Re: Sneak preview of whats to come from Bullseye Power!!! (CRXdan)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by CRXdan »</TD></TR><TR><TD CLASS="quote">will it be available at a reasonable cost to the average consumer?
Looks good, saw a billet wheel at work once, looks insane</TD></TR></TABLE>
Thanks all and yes pricing will be reasonable. It does cost a little more but not several hundred dollars more.
Looks good, saw a billet wheel at work once, looks insane</TD></TR></TABLE>
Thanks all and yes pricing will be reasonable. It does cost a little more but not several hundred dollars more.
Trending Topics
06-26-2008, 07:27 PM
#10
Honda-Tech Member
Re: Sneak preview of whats to come from Bullseye Power!!! (turbodano)
Dan is a bad-***! Well, Bullseye that is..
got a off question though..how often do you go through those cutters? I have seen heads go through a cnc, but never a turbo, and was amazed how much material came off in one clip from such a thin cutter. Just imagining that thing is so easy to crash.
looks awesome though, would love to watch the full process.
got a off question though..how often do you go through those cutters? I have seen heads go through a cnc, but never a turbo, and was amazed how much material came off in one clip from such a thin cutter. Just imagining that thing is so easy to crash.
looks awesome though, would love to watch the full process.
06-26-2008, 07:48 PM
#11
Honda-Tech Member
Thread Starter
Join Date: Nov 2001
Location: Alabama, us
Posts: 10,759
Likes: 0
Received 0 Likes
on
0 Posts
Re: Sneak preview of whats to come from Bullseye Power!!! (HEAD)
Depends on what wheel and if you are removing allot of material of making a finish pass.
Once the machine is proved to be running a good part the tool is changed when the finish starts getting cloudy.
Once the machine is proved to be running a good part the tool is changed when the finish starts getting cloudy.
Thread
Thread Starter
Forum
Replies
Last Post
Rocket
All Motor / Naturally Aspirated
63
10-07-2010 08:30 AM
