skunk2 pro series stage 1 cams for turbo?
#1
Honda-Tech Member
Thread Starter
Join Date: Jul 2007
Posts: 178
Likes: 0
Received 0 Likes
on
0 Posts
skunk2 pro series stage 1 cams for turbo?
what kinda cams do u guys recommend for a turbo setup? its a gsr head with Supertech valve springs & Ti-retainer, sleeved gsr block with 83mm bore, 9:1 Cp pistons, Ls crank and eagle rods, t4/t67 DBB turbo, 4in open downpipe, edelbrock intake mani and 75mm t/b, 1600 precision injectors.....right now i have ctr cams should i stay with those or go with something else like pro series stage 1 cams?
#3
Honda-Tech Member
iTrader: (1)
Join Date: May 2003
Location: SO CAL
Posts: 26,272
Likes: 0
Received 0 Likes
on
0 Posts
Re: skunk2 pro series stage 1 cams for turbo? (ctr-ek)
https://honda-tech.com/zerothread/2009058
https://honda-tech.com/zerothread/2015943
its was right on the 3rd page
https://honda-tech.com/zerothread/2015943
its was right on the 3rd page
Thread
Thread Starter
Forum
Replies
Last Post
RIKITIN
Forced Induction
2
11-24-2018 06:05 PM