Show me how you did your>>> intake to turbo<<<
#1
i ♥ my honda
Global Mod
Global Mod
Thread Starter
Show me how you did your>>> intake(filter) to turbo<<<
I need to get some ideas on how to do this. I have a 99 Si with a rev-hard cast mani and I need to run a filter set up off the turbo. I have slim fan on left side were the pipes need to go. I know of the DRAG set up and the Greddy set up (witch Im not shure if this would work). And I wanted to see what you guys are running and how you aquired your set-ups? PICS WOULD BE GREAT!
ps>> will be k&n or apex-i filter
>>>>>>>No screen filter for me!<<<<<<<<<
Thanks Guys
ps>> will be k&n or apex-i filter
>>>>>>>No screen filter for me!<<<<<<<<<
Thanks Guys
#3
Re: Show me how you did your>>> intake(filter) to turbo<<< (si2die4)
I have a 99 Si myself. I bought myself a 2 3/4" u-bend and I'm gonna be cutting it in half right in the middle of the bend and then turning them opposite to each other to to make a S shaped piece of piping. The lower part of the bend goes to turbo, and the higher end will have the filter.
This is pretty much my filter pipe.
This is pretty much my filter pipe.
#4
i ♥ my honda
Global Mod
Global Mod
Thread Starter
Re: Show me how you did your>>> intake(filter) to turbo<<< (si2die4)
55 veiws and no other Ideas or pics??
Please give me ideas guys. I KNOW most of the ways I just want to compair some setups
Please give me ideas guys. I KNOW most of the ways I just want to compair some setups
#6
Honda-Tech Member
Join Date: Feb 2002
Location: SC61ville, Brooklyn, NY/TX, USA
Posts: 10,836
Likes: 0
Received 0 Likes
on
0 Posts
Re: Show me how you did your>>> intake(filter) to turbo<<< (si2die4)
rev hard makes an intake pipe...
from there site
http://www.revhard.com/press.html
Press Releases
September 5, 2003
Air Filter assembly now available for the 92-00 Civics. Protect your turbo from the elements! 3" to 2.75" Look for a polished version and many more applications coming soon!
i think its 70.00 with the filter
from there site
http://www.revhard.com/press.html
Press Releases
September 5, 2003
Air Filter assembly now available for the 92-00 Civics. Protect your turbo from the elements! 3" to 2.75" Look for a polished version and many more applications coming soon!
i think its 70.00 with the filter
#7
i ♥ my honda
Global Mod
Global Mod
Thread Starter
Re: Show me how you did your>>> intake(filter) to turbo<<< (FredoSP)
That looks good but LOOK what I just found>>>>>>>>>
http://cgi.ebay.com/ebaymotors...38634
35 Shipped w buy it now! I am SHURE this will work for way cheper. I will sell that filter and get k&n or apex-i. I am asking the guy now the size of pipe and the demitons. I am bout to order one.
Best thing Iv seen all night!
http://cgi.ebay.com/ebaymotors...38634
35 Shipped w buy it now! I am SHURE this will work for way cheper. I will sell that filter and get k&n or apex-i. I am asking the guy now the size of pipe and the demitons. I am bout to order one.
Best thing Iv seen all night!
Trending Topics
#9
Honda-Tech Member
Join Date: Jul 2002
Location: Scottsdale, AZ, usa
Posts: 3,105
Likes: 0
Received 0 Likes
on
0 Posts
Re: Show me how you did your>>> intake(filter) to turbo<<< (si2die4)
that thing is gonna be WAAAY too tall... just spend the extra 40 for the one that's made for your turbosetup and car.
#10
i ♥ my honda
Global Mod
Global Mod
Thread Starter
Re: Show me how you did your>>> intake(filter) to turbo<<< (tegasaurus)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by tegasaurus »</TD></TR><TR><TD CLASS="quote">that thing is gonna be WAAAY too tall... just spend the extra 40 for the one that's made for your turbosetup and car. </TD></TR></TABLE>
Were am I going to get the extra 40? Its not even worth spending that kind of money. This is the EXACT SAME THING FOR HALF THE PRICE....Why spend more?? The revhard peice is like 75-80 bucks and people want 75-100 for there drag setup. That is what this is post is all about! I Can just cut it if its too long! This is by far the BEST BANG FOR BUCK I have found yet!
Why dont you give me some ideas instead of putting mine down..
Thanks Anyway
Were am I going to get the extra 40? Its not even worth spending that kind of money. This is the EXACT SAME THING FOR HALF THE PRICE....Why spend more?? The revhard peice is like 75-80 bucks and people want 75-100 for there drag setup. That is what this is post is all about! I Can just cut it if its too long! This is by far the BEST BANG FOR BUCK I have found yet!
Why dont you give me some ideas instead of putting mine down..
Thanks Anyway
#11
Honda-Tech Member
Join Date: Feb 2002
Location: SC61ville, Brooklyn, NY/TX, USA
Posts: 10,836
Likes: 0
Received 0 Likes
on
0 Posts
Re: Show me how you did your>>> intake(filter) to turbo<<< (si2die4)
dude whats 40.00 in the "big picture" to be TURBO Y()!! you gotta pay to play. And the price I said was WITH the air filter. Rev hard wrote me and quoted me that price.
If you want to save $ then go on JCWhitney.com and make your own stuff then
If you want to save $ then go on JCWhitney.com and make your own stuff then
#12
Honda-Tech Member
Join Date: Sep 2002
Location: Vila Velha, Brasil
Posts: 1,666
Likes: 0
Received 0 Likes
on
0 Posts
Re: Show me how you did your>>> intake(filter) to turbo<<< (FredoSP)
here is my filter set-up. It's a rev-hard it on a 94 gsr. I just used a 90 degree bend.
#13
Re: Show me how you did your>>> intake(filter) to turbo<<< (si2die4)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by si2die4 »</TD></TR><TR><TD CLASS="quote">That looks good but LOOK what I just found>>>>>>>>>
http://cgi.ebay.com/ebaymotors...38634
35 Shipped w buy it now! I am SHURE this will work for way cheper. I will sell that filter and get k&n or apex-i. I am asking the guy now the size of pipe and the demitons. I am bout to order one.
Best thing Iv seen all night!
</TD></TR></TABLE>
35 shipped?!!!!
Since your gonna be doing some cutting anyways. Just buy a U-bend for like 20 bucks and cut it in half and get a coupler(it seems as though your on a budget). Atleast this way you'll know it'll fit and its cheaper.
http://cgi.ebay.com/ebaymotors...38634
35 Shipped w buy it now! I am SHURE this will work for way cheper. I will sell that filter and get k&n or apex-i. I am asking the guy now the size of pipe and the demitons. I am bout to order one.
Best thing Iv seen all night!
</TD></TR></TABLE>
35 shipped?!!!!
Since your gonna be doing some cutting anyways. Just buy a U-bend for like 20 bucks and cut it in half and get a coupler(it seems as though your on a budget). Atleast this way you'll know it'll fit and its cheaper.
#14
i ♥ my honda
Global Mod
Global Mod
Thread Starter
Re: Show me how you did your>>> intake(filter) to turbo<<< (LiLOtaku)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by LiLOtaku »</TD></TR><TR><TD CLASS="quote">
35 shipped?!!!!
Since your gonna be doing some cutting anyways. Just buy a U-bend for like 20 bucks and cut it in half and get a coupler(it seems as though your on a budget). Atleast this way you'll know it'll fit and its cheaper.
</TD></TR></TABLE>
This is what I was going to do. That will be 20$ +shipping (same price as ebay listing) then you have to get a filter and paint the pipe since it is verry ugly. This will cost more than 35$. I am going to buy this(I think) And sell the filter to my buddy who has a equal lenth tubular mani and is running a screen right now, for 15$. Now I have a nice, clean looking peice of polished pipeing for my polished turbo.. I think This is the BEST way.
Any one elce wana post up so pics?
Thanks Again Guys
Modified by si2die4 at 9:18 PM 10/12/2003
35 shipped?!!!!
Since your gonna be doing some cutting anyways. Just buy a U-bend for like 20 bucks and cut it in half and get a coupler(it seems as though your on a budget). Atleast this way you'll know it'll fit and its cheaper.
</TD></TR></TABLE>
This is what I was going to do. That will be 20$ +shipping (same price as ebay listing) then you have to get a filter and paint the pipe since it is verry ugly. This will cost more than 35$. I am going to buy this(I think) And sell the filter to my buddy who has a equal lenth tubular mani and is running a screen right now, for 15$. Now I have a nice, clean looking peice of polished pipeing for my polished turbo.. I think This is the BEST way.
Any one elce wana post up so pics?
Thanks Again Guys
Modified by si2die4 at 9:18 PM 10/12/2003
#15
i ♥ my honda
Global Mod
Global Mod
Thread Starter
Re: Show me how you did your>>> intake(filter) to turbo<<< (FredoSP)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by FredoSP »</TD></TR><TR><TD CLASS="quote">dude whats 40.00 in the "big picture" to be TURBO Y()!! you gotta pay to play. And the price I said was WITH the air filter. Rev hard wrote me and quoted me that price.
If you want to save $ then go on JCWhitney.com and make your own stuff then</TD></TR></TABLE>
Il spend that WELL EARNED 40$ on a dyno pull or 2!!
EVERY little bit counts dude
If you want to save $ then go on JCWhitney.com and make your own stuff then</TD></TR></TABLE>
Il spend that WELL EARNED 40$ on a dyno pull or 2!!
EVERY little bit counts dude
#16
Honda-Tech Member
Re: Show me how you did your>>> intake(filter) to turbo<<< (si2die4)
I used a Chrysler Sebring Intake (that's right), perfect bend from the T-housing & matted it onto a VW oval K&N air filter.....
Price = $0.00 & 10-min to install...
Plus it's black allready, no need to powdercoat ....
Price = $0.00 & 10-min to install...
Plus it's black allready, no need to powdercoat ....
#17
i ♥ my honda
Global Mod
Global Mod
Thread Starter
Re: Show me how you did your>>> intake(filter) to turbo<<< (Honda4CX-T)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by Honda4CX-T »</TD></TR><TR><TD CLASS="quote">I used a Chrysler Sebring Intake (that's right), perfect bend from the T-housing & matted it onto a VW oval K&N air filter.....
Price = $0.00 & 10-min to install...
Plus it's black allready, no need to powdercoat .... </TD></TR></TABLE>
Now that is an idea
Price = $0.00 & 10-min to install...
Plus it's black allready, no need to powdercoat .... </TD></TR></TABLE>
Now that is an idea
#18
Member
Re: Show me how you did your>>> intake(filter) to turbo<<< (si2die4)
#19
Re: Show me how you did your>>> intake(filter) to turbo<<< (brryder)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by brryder »</TD></TR><TR><TD CLASS="quote">here is my filter set-up. It's a rev-hard it on a 94 gsr. I just used a 90 degree bend.
</TD></TR></TABLE>
did you keep stock fans??? or did you get slim?
</TD></TR></TABLE>
did you keep stock fans??? or did you get slim?
#21
Honda-Tech Member
Re: Show me how you did your>>> intake(filter) to turbo<<< (si2die4)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by si2die4 »</TD></TR><TR><TD CLASS="quote">
Now that is an idea </TD></TR></TABLE>
Pic from above:
and bit closer ...
Now that is an idea </TD></TR></TABLE>
Pic from above:
and bit closer ...
#23
i ♥ my honda
Global Mod
Global Mod
Thread Starter
Re: (bigwig)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by bigwig »</TD></TR><TR><TD CLASS="quote">im going to replicated this one as close as i can...where does one get one of those filters and what are they called
</TD></TR></TABLE>
The filter in the pic is an hks type. Is that what you are talking about? Real hks filter is prob. 70-80$. Look alike on ebay 15 shiped!
I my self do not like FOAM filters. IMO
</TD></TR></TABLE>
The filter in the pic is an hks type. Is that what you are talking about? Real hks filter is prob. 70-80$. Look alike on ebay 15 shiped!
I my self do not like FOAM filters. IMO
#24
Member
Re: (bigwig)
yes, that is an HKS filter. and its basically the only one i found that was gonna fit comfortably in my engine bay. as far as the pipe goes its 3" mandrel stainless steel with a catch can nipple on the bottom side that u cannot see. the pipe i got made for 80 bucks and the filter i got from a friend for 20. works well and is an awesome fit.
Thread
Thread Starter
Forum
Replies
Last Post