Should I run GSR IM w/ open IAB's or Blox IM
#1
Junior Member
Thread Starter
Join Date: Apr 2004
Location: calgary, canada
Posts: 178
Likes: 0
Received 0 Likes
on
0 Posts
Should I run GSR IM w/ open IAB's or Blox IM
I was unsuccesful in searching this but i just bought some charge pipes that were on a b18b in an EG. My gsr is in an EK. I could never figure out the proper wiring so I've always been running with both IAB's open on my intake mainfold. i know I lose low end power, but what you gonna do.
So my question is do you think it's better to just reweld the charge pipes to fit my gsr intake mani or buy a blox intake mani, because I believe the charge pipes would not have to be modified to bolt up to the blox mani.
Also if I go for the blox IM, should I run a p28 or stick to the p72 ecu, thanks
So my question is do you think it's better to just reweld the charge pipes to fit my gsr intake mani or buy a blox intake mani, because I believe the charge pipes would not have to be modified to bolt up to the blox mani.
Also if I go for the blox IM, should I run a p28 or stick to the p72 ecu, thanks
Thread
Thread Starter
Forum
Replies
Last Post
FreaQ
All Motor / Naturally Aspirated
8
03-30-2010 05:31 PM
hondateg08
Acura Integra
1
08-06-2008 12:30 PM