SFP Manifold with T4 flange on H22
#1
Honda-Tech Member
Thread Starter
Join Date: Jan 2004
Location: New Hampshire, USA
Posts: 112
Likes: 0
Received 0 Likes
on
0 Posts
SFP Manifold with T4 flange on H22
Looking for some turbo recommendations I am looking to hit 400+whp
I have looked at the SC6176 w/an .81A/R turbine but I have been told that I might want to go bigger. This seems a little large to me based on what it seems some of the T3/T4 hybrid guys run
I also am wondering about some of the bullseye stuff, it looks like a S366 would be a good fit but I am not the most well versed on turbo's and compressor maps just looking for some guidance.
I am looking for somehting that will spool on the lower side and I know this is a tough thing to do with a T4 housing but all help is appreciated
TIA
I have looked at the SC6176 w/an .81A/R turbine but I have been told that I might want to go bigger. This seems a little large to me based on what it seems some of the T3/T4 hybrid guys run
I also am wondering about some of the bullseye stuff, it looks like a S366 would be a good fit but I am not the most well versed on turbo's and compressor maps just looking for some guidance.
I am looking for somehting that will spool on the lower side and I know this is a tough thing to do with a T4 housing but all help is appreciated
TIA
#3
Junior Member
Join Date: Feb 2003
Location: Grand Cayman, Cayman Islands
Posts: 803
Likes: 0
Received 0 Likes
on
0 Posts
Re: SFP Manifold with T4 flange on H22 (LudeLooker)
I have the same SFP mani h22, only its a T3. Got the Sc6176e, .63 exh .60 comp. its feels great, i dont even want to experiment with anything else, i love it.
#5
Re: SFP Manifold with T4 flange on H22 (LudeLooker)
The SC6176 is rated for up to 680hp. You should be fine with your goal and with room to grow. I dyno'd 511whp on my sc6176 w/ .81 a/r t3 housing @17psi and wasn't getting close to maxing it out. The spool is pretty good to, but I also have a 3.2L.
I am upgrading to a SC6776 for a 600+whp run. So, if you are interested in a slightly Used sc6176, PM me, or e-mail at e36bmer @ yahoo.com
I am upgrading to a SC6776 for a 600+whp run. So, if you are interested in a slightly Used sc6176, PM me, or e-mail at e36bmer @ yahoo.com
Thread
Thread Starter
Forum
Replies
Last Post
hondaracin24
Forced Induction
7
12-12-2006 01:54 PM