Set up and 1/4 mile times
#1
Thread Starter
Join Date: Aug 2002
Location: Ft.Lauderdale, Florida, USA
Posts: 2,509
Likes: 0
Received 0 Likes
on
0 Posts
Set up and 1/4 mile times
For everyone who PMed me about my set up after i put up my 303whp dyno on my stock Ls i figured i would post up the Setup and the time slip.
Stock B18B motor
T3/T04E
SFP Manifold
2.5->3" DP
740cc Injectors
Greddy IC piping (my top pipe that goes to my TB isn't greddy it is 1.75" which is wayyyyy too small)
Greddy type 24 FMIC
HKS Racing BOV
Profec B Boost controller
Best Time slip (8/21/04) (i still spun and couldn't launch for crap.
R/T..... .737
60'..... 2.280
330.... 5.810
1/8.... 8.560
MPH... 90.09
1000.. 10.883
1/4.... 12.891
MPH... 111.96
P/S - I read the mod's wishes and it says don't post times with out the set up so its some sort of tech related. If anyone has questions feel free to ask. BTW lets hear other peoples setups and timeslips.
-Trent
Stock B18B motor
T3/T04E
SFP Manifold
2.5->3" DP
740cc Injectors
Greddy IC piping (my top pipe that goes to my TB isn't greddy it is 1.75" which is wayyyyy too small)
Greddy type 24 FMIC
HKS Racing BOV
Profec B Boost controller
Best Time slip (8/21/04) (i still spun and couldn't launch for crap.
R/T..... .737
60'..... 2.280
330.... 5.810
1/8.... 8.560
MPH... 90.09
1000.. 10.883
1/4.... 12.891
MPH... 111.96
P/S - I read the mod's wishes and it says don't post times with out the set up so its some sort of tech related. If anyone has questions feel free to ask. BTW lets hear other peoples setups and timeslips.
-Trent
#6
Re: Set up and 1/4 mile times (IntegracinGSR)
303whp, 2200lb, and only 111.9mph???? Good run, but with that kind of whp and that weight, I would have expected 116mph or so. My old hatch ran 110.9mph with 250whp, but I am not sure of the weight(it was an EG).
#7
Thread Starter
Join Date: Aug 2002
Location: Ft.Lauderdale, Florida, USA
Posts: 2,509
Likes: 0
Received 0 Likes
on
0 Posts
Re: Set up and 1/4 mile times (1.8t)
im useing a GSR tranny.....when i was makeing 242whp useing the LS tranny i was trapping 110...for some reason i lost MPH with the tighter gearing.
Trending Topics
#9
Honda-Tech Member
Join Date: Oct 2001
Location: Pembroke Pines, Florida, United States
Posts: 6,024
Likes: 0
Received 0 Likes
on
0 Posts
Re: Set up and 1/4 mile times (maddog20)
bump for good work by my buddy trent. now gimme my 3bar back bish... i'm trying to get the car running today or tomorrow . i still <3 you though
#11
Thread Starter
Join Date: Aug 2002
Location: Ft.Lauderdale, Florida, USA
Posts: 2,509
Likes: 0
Received 0 Likes
on
0 Posts
Re: Set up and 1/4 mile times (CivicRyda2k)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by CivicRyda2k »</TD></TR><TR><TD CLASS="quote">bump for good work by my buddy trent. now gimme my 3bar back bish... i'm trying to get the car running today or tomorrow . i still <3 you though </TD></TR></TABLE>
come get it hoe i wont be able to drive the car when i take it out.
come get it hoe i wont be able to drive the car when i take it out.
Thread
Thread Starter
Forum
Replies
Last Post