RMS fab Ryans gt4202 dyno video
#1
Honda-Tech Member
Thread Starter
RMS fab Ryans gt4202 dyno video
Finally got around to getting this thing "done." Weve been having problems for a while but thanks to Slowmotion Motorsports we got everything straightened out. We were at the dyno a couple weeks ago but we have some ignition issues after 16psi, than we had some clutch slippage after we threw a blaster coil on. Slowmotion got the new clutch in stock and installed in 3 days and we went back to the dyno the following saturday with a full tank of 110.
Setup consists of:
ls/vtec golden eagle sleeved 85mm
Eagle rods and wiseco 8.8:1 coated pistons
Fully ported b16 head by All industrial...killer port work thx Dave!
maxworx cams
Rev springs and crower retainers
victor x and bdl 72mm tb
All 3" ss ic piping custom made by me
RMS fab divided top mount t4 with RMS 4" ss dp
Walbro and 1000's
Gt4202 non bb with 1.01 ar
Obviously we ran out of fuel before we could turn up the boost any more...def more to come. Heres a couple vids. Correy will be emailing me the dyno graph shortly. 550whp and 383wtq at 20psi
Please disregard the end of the video. Some late night taco bell action down in akron.
Some shots of the engine bay and RMS manifold
All this wouldnt have been possible w/o the help of:
Slowmotion Motorsports and everyone there....Corey Parrish for the tune, Josh for getting all my parts on time, Wyan(thanks for putting up with all my phone calls), and their mechanic Scotto for making sure it all went in correctly. I cant say enough for this crew awesome guys and i will never buy parts and dyno anywhere else period!!
Want to also thank my buddy Shawn for all his help the last 3 years and making this car happen, couldnt have done it w/o you...
Damian Borroto of TdAutowerkes for the maxworx cams
Boostfed for the precision 750 ic
Jared Deskins for all his advice..would have made many mistakes if i wasnt for you mang, thx!!
Ron Shearer @ Shearer Fabrications for his help getting me my ksport suspension and various other parts for the car
Jp Riccio aka colt boostin for all his support and help.
Lastly i want to thank all my RMS customers for supporting me and my work, thx guys!!
Setup consists of:
ls/vtec golden eagle sleeved 85mm
Eagle rods and wiseco 8.8:1 coated pistons
Fully ported b16 head by All industrial...killer port work thx Dave!
maxworx cams
Rev springs and crower retainers
victor x and bdl 72mm tb
All 3" ss ic piping custom made by me
RMS fab divided top mount t4 with RMS 4" ss dp
Walbro and 1000's
Gt4202 non bb with 1.01 ar
Obviously we ran out of fuel before we could turn up the boost any more...def more to come. Heres a couple vids. Correy will be emailing me the dyno graph shortly. 550whp and 383wtq at 20psi
All this wouldnt have been possible w/o the help of:
Slowmotion Motorsports and everyone there....Corey Parrish for the tune, Josh for getting all my parts on time, Wyan(thanks for putting up with all my phone calls), and their mechanic Scotto for making sure it all went in correctly. I cant say enough for this crew awesome guys and i will never buy parts and dyno anywhere else period!!
Want to also thank my buddy Shawn for all his help the last 3 years and making this car happen, couldnt have done it w/o you...
Damian Borroto of TdAutowerkes for the maxworx cams
Boostfed for the precision 750 ic
Jared Deskins for all his advice..would have made many mistakes if i wasnt for you mang, thx!!
Ron Shearer @ Shearer Fabrications for his help getting me my ksport suspension and various other parts for the car
Jp Riccio aka colt boostin for all his support and help.
Lastly i want to thank all my RMS customers for supporting me and my work, thx guys!!
#5
Honda-Tech Member
Thread Starter
Yeah, i just wanted to make some power before winter came for a baseline. WE still have a lot of work to do to get it ready for higher numbers. The turbo is pretty laggy but tolerable. When it kicks in it makes it all worth it! Were going to do 1600's and an eliminator pump.
Btw, the car is 4 sale
Btw, the car is 4 sale
Trending Topics
#10
HT White Ops
iTrader: (4)
Join Date: Oct 2005
Location: Ova Thur, United States
Posts: 6,116
Likes: 0
Received 0 Likes
on
0 Posts
Re: RMS fab Ryans gt4202 dyno video (SOHC_MShue)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by SOHC_MShue »</TD></TR><TR><TD CLASS="quote">any pics of the dyno sheet? I want to see some high boost numbers </TD></TR></TABLE>
#13
Re: (1Quikgsr)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by 1Quikgsr »</TD></TR><TR><TD CLASS="quote">in the picture of the top mount it looks like twin 44s but when its installed on the car it looks like twin 38s???</TD></TR></TABLE>
i noticed that too
i noticed that too
#17
Honda-Tech Member
Join Date: Sep 2004
Location: Boost > NA
Posts: 15,428
Likes: 0
Received 0 Likes
on
0 Posts
What clutch yea runnin and did it slip at all? Looks like your in the same boat, except i need bigger injectors, fuel pump, and clutch. I'm thinking about tuning it for 400 whp and callling it a day
Very nice job!
Very nice job!
#18
Honda-Tech Member
Join Date: Apr 2007
Location: canton, oh
Posts: 253
Likes: 0
Received 0 Likes
on
0 Posts
Re: (gsrt)
ron shearer is the man. he's got my vw now building a custom manifold for it. car sounds good man. which taco bell in akron can i see *******? i live in canton, i might get hungry tonight.
#19
Re: (under_boost)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by under_boost »</TD></TR><TR><TD CLASS="quote">ron shearer is the man. he's got my vw now building a custom manifold for it. car sounds good man. which taco bell in akron can i see *******? i live in canton, i might get hungry tonight. </TD></TR></TABLE>
You got to show your NARDS first lol
OH nice sandals in the vid lol
You got to show your NARDS first lol
OH nice sandals in the vid lol
#22
Honda-Tech Member
Join Date: May 2001
Location: Tallahassee, FL, US
Posts: 7,190
Likes: 0
Received 0 Likes
on
0 Posts
Re: (1Quikgsr)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by 1Quikgsr »</TD></TR><TR><TD CLASS="quote">in the picture of the top mount it looks like twin 44s but when its installed on the car it looks like twin 38s???</TD></TR></TABLE>
the topmount in the pic with the twin 44s was built for me, as well as that downpipe.
the topmount in the pic with the twin 44s was built for me, as well as that downpipe.
#24
Honda-Tech Member
Thread Starter
Originally we had some no name 6 puck from Tom Choe at camp1320.com. Withstood over 3 years of over 300ft/lbs and two different turbo setups. As soon as the 42 kicked in it slipped immedietly. Slowmo installed the new actxxr6 clutch and no more slippage. I love that clutch.
Under_boost the vW manifold is looking so hot! Welded her myself! You're in for a hell of a ride....im not sure which taco bell. We were at a 12 kegger and ended up there. Its the only taco bell near all the frat houses etc.
Doostur....400whp is nice but i like to have 550whp for the croch rockets haha. And you def wont "call it a day" when you get a taste of 400whp......
Right now i just dont have the time to do the fuel system 2 many damn manifolds to build for you guys lol. Its already getting cold up here in ohio so im sure ill make time. Thx
Under_boost the vW manifold is looking so hot! Welded her myself! You're in for a hell of a ride....im not sure which taco bell. We were at a 12 kegger and ended up there. Its the only taco bell near all the frat houses etc.
Doostur....400whp is nice but i like to have 550whp for the croch rockets haha. And you def wont "call it a day" when you get a taste of 400whp......
Right now i just dont have the time to do the fuel system 2 many damn manifolds to build for you guys lol. Its already getting cold up here in ohio so im sure ill make time. Thx
#25
Honda-Tech Member
Join Date: Apr 2007
Location: canton, oh
Posts: 253
Likes: 0
Received 0 Likes
on
0 Posts
Re: (Teglove2)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by Boostfed.com »</TD></TR><TR><TD CLASS="quote">
You got to show your NARDS first lol
</TD></TR></TABLE>
eh, no problem. helecopter anyone? lol.
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by Teglove2 »</TD></TR><TR><TD CLASS="quote">Under_boost the vW manifold is looking so hot! Welded her myself! You're in for a hell of a ride....im not sure which taco bell. We were at a 12 kegger and ended up there. Its the only taco bell near all the frat houses etc.
</TD></TR></TABLE>
nice! i can't wait to pick it up and tear it all back down. HAHA.
gotta be the taco bell on exchange. i feel the munchies coming on, and full blown at 12:00. vids up in a bit.
You got to show your NARDS first lol
</TD></TR></TABLE>
eh, no problem. helecopter anyone? lol.
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by Teglove2 »</TD></TR><TR><TD CLASS="quote">Under_boost the vW manifold is looking so hot! Welded her myself! You're in for a hell of a ride....im not sure which taco bell. We were at a 12 kegger and ended up there. Its the only taco bell near all the frat houses etc.
</TD></TR></TABLE>
nice! i can't wait to pick it up and tear it all back down. HAHA.
gotta be the taco bell on exchange. i feel the munchies coming on, and full blown at 12:00. vids up in a bit.