Rev Hard 2C Question. . . Is this a good deal?
12-09-2002, 01:00 PM
#1
Honda-Tech Member
Thread Starter
Join Date: May 2002
Location: California
Posts: 3,047
Likes: 0
Received 0 Likes
on
0 Posts
Rev Hard 2C Question. . . Is this a good deal?
Upgradable ----> Rev Hard Cast Iron manifold w/ AC
Rev Hard Turbonetics T3/T04E Hybrid Turbo
Rev Hard 2C Intercooler (32x8x3.5)
Upgradable ----> Deltagate (9-12psi)
Upgradable ----> Vortec Blow Off Valve
2.5" Aluminum Charge Pipe
2.5" Downpipe
2.25" Aluminzed Mandrel Bent Piping
Not Getting ----> Progressive Type Fuel Regulator
Not Getting ----> High Volume Fuel Pump
Purosil Hoses & Clamps
Steel Braided -3 Oil Line
Oil Return Line
Not Getting ----> High Pressure Fuel Line
High Pressure Silicon Hose
Neccessary Vacuum Tee's
Neccessary Vacuum Lines
$2,650 shipped with regular cast manifold.
Upgrades:
Tial Wastegate
HKS Super Sequential BOV + Flange for BOV
$2790 shipped with the Tial and HSK BOV
Additional Upgrades:
Rev Hard Iron/tubular w/o AC
$2815 shipped with the Rev Hard Iron turbular instead of the cast
or I do this...
MaxRev Stainless Steel Manifold
MaxRev Stainless Steel Downpipe (with flexpipe)
MaxRev Intercooler (20" x 3" x 8")
MaxRev BOV
MaxRev Stainless Oil Feed
Garrett T3/T04E turbo
Tial 35mm WasteGate
DIY piping kit (Stainless Steel U bends)
Rubber Oil Return
Piping couplers
clamps
hardware
$2,300 shipped
If I went with the MaxRev I will be buying a HKS BOV that I found for $210 shipped.
$2,510 shipped New price of the MaxRev kit.
$305 more for the Rev Hard w/Tubular manifold. But it's not stainless steal like the MaxRev. But then again the Intercooler is 12" Wider and .5" thicker.
<IMG NAME="icon" SRC="http://rely.net/~htimages/smile/emcrook.gif" BORDER="0">
[Modified by RyanAutry, 12:30 PM 12/21/2002]
Rev Hard Turbonetics T3/T04E Hybrid Turbo
Rev Hard 2C Intercooler (32x8x3.5)
Upgradable ----> Deltagate (9-12psi)
Upgradable ----> Vortec Blow Off Valve
2.5" Aluminum Charge Pipe
2.5" Downpipe
2.25" Aluminzed Mandrel Bent Piping
Not Getting ----> Progressive Type Fuel Regulator
Not Getting ----> High Volume Fuel Pump
Purosil Hoses & Clamps
Steel Braided -3 Oil Line
Oil Return Line
Not Getting ----> High Pressure Fuel Line
High Pressure Silicon Hose
Neccessary Vacuum Tee's
Neccessary Vacuum Lines
$2,650 shipped with regular cast manifold.
Upgrades:
Tial Wastegate
HKS Super Sequential BOV + Flange for BOV
$2790 shipped with the Tial and HSK BOV
Additional Upgrades:
Rev Hard Iron/tubular w/o AC
$2815 shipped with the Rev Hard Iron turbular instead of the cast
or I do this...
MaxRev Stainless Steel Manifold
MaxRev Stainless Steel Downpipe (with flexpipe)
MaxRev Intercooler (20" x 3" x 8")
MaxRev BOV
MaxRev Stainless Oil Feed
Garrett T3/T04E turbo
Tial 35mm WasteGate
DIY piping kit (Stainless Steel U bends)
Rubber Oil Return
Piping couplers
clamps
hardware
$2,300 shipped
If I went with the MaxRev I will be buying a HKS BOV that I found for $210 shipped.
$2,510 shipped New price of the MaxRev kit.
$305 more for the Rev Hard w/Tubular manifold. But it's not stainless steal like the MaxRev. But then again the Intercooler is 12" Wider and .5" thicker.
<IMG NAME="icon" SRC="http://rely.net/~htimages/smile/emcrook.gif" BORDER="0">
[Modified by RyanAutry, 12:30 PM 12/21/2002]
12-09-2002, 01:16 PM
#2
Member
Join Date: Jan 2002
Location: Trash Can
Posts: 1,111
Likes: 0
Received 0 Likes
on
0 Posts
Re: Rev Hard 2C Question. . . Is this a good deal? (RyanAutry)
well, to be honest the piping is a pain to DIY unless ur pretty good at welding to make clean cuts/welds. Revhard seems like a good kit. However, i know u didn't mention, but i would do a custom, simply cuz u can get the same quality stuff, ur own choice of parts, and it's cheaper, i just finished mine a couple of weeks ago.
12-09-2002, 01:25 PM
#5
Honda-Tech Member
Thread Starter
Join Date: May 2002
Location: California
Posts: 3,047
Likes: 0
Received 0 Likes
on
0 Posts
Re: Rev Hard 2C Question. . . Is this a good deal? (RyanAutry)
Rev Hard 2C Intercooler (32x8x3.5)
MaxRev Intercooler (20x8x3)
I just noticed the size difference with the intercoolers. Is the Rev Hard intercooler too big??
12-09-2002, 01:56 PM
#6
Honda-Tech Member
Re: Rev Hard 2C Question. . . Is this a good deal? (RyanAutry)
Rev Hard 2C Intercooler (32x8x3.5)
MaxRev Intercooler (20x8x3)
I just noticed the size difference with the intercoolers. Is the Rev Hard intercooler too big??
MaxRev Intercooler (20x8x3)
I just noticed the size difference with the intercoolers. Is the Rev Hard intercooler too big??
12-09-2002, 05:16 PM
#7
Honda-Tech Member
Thread Starter
Join Date: May 2002
Location: California
Posts: 3,047
Likes: 0
Received 0 Likes
on
0 Posts
Re: Rev Hard 2C Question. . . Is this a good deal? (MatT3T4)
Rev Hard 2C Intercooler (32x8x3.5)
MaxRev Intercooler (20x8x3)
I just noticed the size difference with the intercoolers. Is the Rev Hard intercooler too big??
No, not at all.
MaxRev Intercooler (20x8x3)
I just noticed the size difference with the intercoolers. Is the Rev Hard intercooler too big??
No, not at all.
So what do you go with? Do you spend the extra $300?
Trending Topics
12-09-2002, 05:32 PM
#9
Honda-Tech Member
Thread Starter
Join Date: May 2002
Location: California
Posts: 3,047
Likes: 0
Received 0 Likes
on
0 Posts
Re: Rev Hard 2C Question. . . Is this a good deal? (tecnic1)
Absolutley.
http://www.afterhourzracing.com/shop...bid=&PHPSESSID=
[Modified by RyanAutry, 7:24 PM 12/9/2002]
http://www.afterhourzracing.com/shop...bid=&PHPSESSID=
[Modified by RyanAutry, 7:24 PM 12/9/2002]
12-09-2002, 06:22 PM
#11
Honda-Tech Member
Thread Starter
Join Date: May 2002
Location: California
Posts: 3,047
Likes: 0
Received 0 Likes
on
0 Posts
Re: Rev Hard 2C Question. . . Is this a good deal? (Pat)
I saw the HKS SSQ bov for 175 shipped at the groupbuycenter
12-09-2002, 07:11 PM
#12
Join Date: Jun 2002
Posts: 1,381
Likes: 0
Received 0 Likes
on
0 Posts
Re: Rev Hard 2C Question. . . Is this a good deal? (RyanAutry)
Additional Upgrades:
Rev Hard Iron/tubular w/o AC
$2815 shipped with the Rev Hard Iron turbular instead of the cast
Rev Hard Iron/tubular w/o AC
$2815 shipped with the Rev Hard Iron turbular instead of the cast
12-09-2002, 07:24 PM
#13
Join Date: Jun 2002
Location: PORN CAPITAL OF THE WORLD, Ca, usa
Posts: 3,599
Likes: 0
Received 0 Likes
on
0 Posts
Re: Rev Hard 2C Question. . . Is this a good deal? (AVATAR)
Yes Revhard Mfg still makes that manfiold..!! i have them in stock ... or you can call Revhard at 818-764-4312
12-09-2002, 07:55 PM
#14
Honda-Tech Member
Thread Starter
Join Date: May 2002
Location: California
Posts: 3,047
Likes: 0
Received 0 Likes
on
0 Posts
Re: Rev Hard 2C Question. . . Is this a good deal? (camp1320.com)
Yes Revhard Mfg still makes that manfiold..!! i have them in stock ... or you can call Revhard at 818-764-4312
12-09-2002, 07:59 PM
#15
Join Date: Jun 2002
Location: PORN CAPITAL OF THE WORLD, Ca, usa
Posts: 3,599
Likes: 0
Received 0 Likes
on
0 Posts
Re: Rev Hard 2C Question. . . Is this a good deal? (RyanAutry)
Yes RevHard Mfg makes lots of different style turbo manifolds.... HP/TOYOMOTO , H22A powered one of the fastest hondas in the world is using RevHard Mfg EQ manifold....!!Jojo 8sec club, Lisa 8 sec club, Kenny 8 sec club, and many 9 sec cars are running RevHard....what do you think..??
[Modified by camp1320.com, 9:00 PM 12/9/2002]
[Modified by camp1320.com, 9:00 PM 12/9/2002]
12-09-2002, 08:01 PM
#16
Honda-Tech Member
Thread Starter
Join Date: May 2002
Location: California
Posts: 3,047
Likes: 0
Received 0 Likes
on
0 Posts
Re: Rev Hard 2C Question. . . Is this a good deal? (camp1320.com)
Yes RevHard Mfg makes lots of different style turbo manifolds.... HP/TOYOMOTO , H22A powered one of the fastest hondas in the world is using RevHard Mfg EQ manifold....!!Jojo 8sec club, Lisa 8 sec club, Kenny 8 sec club, and many 9 sec cars are running RevHard....what do you think..??
But I wanted to know how the Iron/Tubular stacks up against their own Cast/Tubular, MaxRev's SS, SFP Tubular, and drag's cast manifold?
12-09-2002, 08:37 PM
#17
I am a bad person
Re: Rev Hard 2C Question. . . Is this a good deal? (RyanAutry)
I'd like to hear any likes or dislikes about the revhard tubular manifold also. I'm running the cast a/c version and it flows pretty good but i'm looking to make more room and have turbo on the other side.
12-09-2002, 10:50 PM
#18
Honda-Tech Member
Thread Starter
Join Date: May 2002
Location: California
Posts: 3,047
Likes: 0
Received 0 Likes
on
0 Posts
Re: Rev Hard 2C Question. . . Is this a good deal? (MotorMatrix.com)
I'd like to hear any likes or dislikes about the revhard tubular manifold also. I'm running the cast a/c version and it flows pretty good but i'm looking to make more room and have turbo on the other side.
12-10-2002, 10:25 PM
#20
Member
Join Date: Jun 2002
Location: TX, USA
Posts: 1,172
Likes: 0
Received 0 Likes
on
0 Posts
Re: Rev Hard 2C Question. . . Is this a good deal? (RyanAutry)
i would go with a custom kit:
maxrev manifold
maxrev downpipe
t3/t04e 63 a/r 57 trim
revhard piping
pwr intercooler
the maxrev downpipe is a work of art... a gagillion times nicer than revhards.
manifold is really nice too.
maxrev manifold
maxrev downpipe
t3/t04e 63 a/r 57 trim
revhard piping
pwr intercooler
the maxrev downpipe is a work of art... a gagillion times nicer than revhards.
manifold is really nice too.
12-10-2002, 10:55 PM
#21
Honda-Tech Member
Thread Starter
Join Date: May 2002
Location: California
Posts: 3,047
Likes: 0
Received 0 Likes
on
0 Posts
Re: Rev Hard 2C Question. . . Is this a good deal? (lilxvtecxpwr)
i would go with a custom kit:
maxrev manifold
maxrev downpipe
t3/t04e 63 a/r 57 trim
revhard piping
pwr intercooler
the maxrev downpipe is a work of art... a gagillion times nicer than revhards.
manifold is really nice too.
maxrev manifold
maxrev downpipe
t3/t04e 63 a/r 57 trim
revhard piping
pwr intercooler
the maxrev downpipe is a work of art... a gagillion times nicer than revhards.
manifold is really nice too.
12-10-2002, 11:55 PM
#22
Join Date: Sep 2002
Location: Valencia, CA
Posts: 52
Likes: 0
Received 0 Likes
on
0 Posts
Re: Rev Hard 2C Question. . . Is this a good deal? (RyanAutry)
I say go with the complete Rev Hard stage 2c kit. Its much easier to just go with a whole kit instead of pieceing together a custom kit.
12-11-2002, 06:35 AM
#23
Member
Join Date: Jun 2002
Location: TX, USA
Posts: 1,172
Likes: 0
Received 0 Likes
on
0 Posts
Re: Rev Hard 2C Question. . . Is this a good deal? (RyanAutry)
i would go with a custom kit:
maxrev manifold
maxrev downpipe
t3/t04e 63 a/r 57 trim
revhard piping
pwr intercooler
the maxrev downpipe is a work of art... a gagillion times nicer than revhards.
manifold is really nice too.
What's the street price on all that. Shipped prices if you can?
i would go with a custom kit:
maxrev manifold
maxrev downpipe
t3/t04e 63 a/r 57 trim
revhard piping
pwr intercooler
the maxrev downpipe is a work of art... a gagillion times nicer than revhards.
manifold is really nice too.
maxrev manifold
maxrev downpipe
t3/t04e 63 a/r 57 trim
revhard piping
pwr intercooler
the maxrev downpipe is a work of art... a gagillion times nicer than revhards.
manifold is really nice too.
What's the street price on all that. Shipped prices if you can?
i would go with a custom kit:
maxrev manifold
maxrev downpipe
t3/t04e 63 a/r 57 trim
revhard piping
pwr intercooler
the maxrev downpipe is a work of art... a gagillion times nicer than revhards.
manifold is really nice too.
max rev manifold 400
max rev downpipe 300
t3/t04e 300-600 (depending on used or not)
revhard piping (you'll have to find that)
pwr ic 500
12-11-2002, 07:25 AM
#24
Honda-Tech Member
Re: Rev Hard 2C Question. . . Is this a good deal? (11sec4door)
I say go with the complete Rev Hard stage 2c kit. Its much easier to just go with a whole kit instead of pieceing together a custom kit.
Half of the people that piece something together end up spending MORE money and getting the WRONG pieces.
12-11-2002, 10:30 AM
#25
Join Date: Sep 2002
Location: Valencia, CA
Posts: 52
Likes: 0
Received 0 Likes
on
0 Posts
Re: Rev Hard 2C Question. . . Is this a good deal? (lilxvtecxpwr)
custom kits arent hard at all. i mean, if you are going to fork out a couple of grand on your car, why would u half *** it? mind as well buy the best parts instead of a "kit" because its easier.
