Rebuilding more crap. Please give me some insight.
#1
Honda-Tech Member
Thread Starter
iTrader: (1)
Join Date: May 2002
Location: PA
Posts: 1,561
Likes: 0
Received 0 Likes
on
0 Posts
Rebuilding more crap. Please give me some insight.
OK, so now that I'm going to be getting a bill for 2 grand for my transmission to support around 350 to 400 hp I figured I should upgrade my engine also to utilize that. I already bought JE pistons (9:1 compression) and ARP head studs but I haven't bought anything else yet. Here is what I was thinking but I'm not sure if I'm on target. I really just don't want to get some massive crap if I don't need it.
My list:
Crower rods
Micropolished crank
Darton iron sleeves
DSS stage II axles
Cometic 2.0mm headgasket
P.S. - My goal is 300 hp to the crank. Please help me, am I on target or not?
My list:
Crower rods
Micropolished crank
Darton iron sleeves
DSS stage II axles
Cometic 2.0mm headgasket
P.S. - My goal is 300 hp to the crank. Please help me, am I on target or not?
#2
Junior Member
Join Date: Feb 2002
Location: Slowlane
Posts: 847
Likes: 0
Received 0 Likes
on
0 Posts
Re: Rebuilding more crap. Please give me some insight. (MyWhiteCivic)
Why not Eagle Rods, and use the xtra money elsewhere.
And go w/ AEM or Hondata...
Good Luck w/ rebuild..
And go w/ AEM or Hondata...
Good Luck w/ rebuild..
#3
Honda-Tech Member
Join Date: Feb 2002
Location: In the sticks, Tn, U.S.
Posts: 843
Likes: 0
Received 0 Likes
on
0 Posts
Re: Rebuilding more crap. Please give me some insight. (MyWhiteCivic)
If you are just shooting for about 300 horse to the crank. I would just stay stock and just buy a EMS or Hondata and tune it. I have total confidence in stock honda parts and 300 horse should be obtainable. Just my .02 cents though. Anyone else?
#4
Honda-Tech Member
Thread Starter
iTrader: (1)
Join Date: May 2002
Location: PA
Posts: 1,561
Likes: 0
Received 0 Likes
on
0 Posts
Re: Rebuilding more crap. Please give me some insight. (dwilson)
I already have a Hondata 2bd. Are RC 440 injectors big enough to handle 300 hp because I already have them?
#5
Junior Member
Join Date: Feb 2002
Location: Slowlane
Posts: 847
Likes: 0
Received 0 Likes
on
0 Posts
Re: Rebuilding more crap. Please give me some insight. (MyWhiteCivic)
I already have a Hondata 2bd. Are RC 440 injectors big enough to handle 300 hp because I already have them?
if not then 550's should work fine..
Thread
Thread Starter
Forum
Replies
Last Post
xbigpitax
All Motor / Naturally Aspirated
12
07-22-2011 12:34 PM