Rebuilding a 98 LS engine for Forced Induction. Need suggestions on parts?
#1
Honda-Tech Member
Thread Starter
Join Date: Mar 2002
Location: NY, NY
Posts: 351
Likes: 0
Received 0 Likes
on
0 Posts
Rebuilding a 98 LS engine for Forced Induction. Need suggestions on parts?
Planning on rebuilding a 98 LS engine sitting in my garage for forced induction.
Suggestions on aftermarket parts for the rebuild?
Parts I Plan on Replacing and Need Suggestions:
Pistons (9:1)
Sleeves
Rods
Head Bolts
Block Guard
Camshafts
Valves
Valve Springs
Intake Manifold
Anything I Missed?
Thanks guys. Honda-Tech Rules!
Suggestions on aftermarket parts for the rebuild?
Parts I Plan on Replacing and Need Suggestions:
Pistons (9:1)
Sleeves
Rods
Head Bolts
Block Guard
Camshafts
Valves
Valve Springs
Intake Manifold
Anything I Missed?
Thanks guys. Honda-Tech Rules!
#2
Honda-Tech Member
Join Date: Feb 2003
Location: schooling kids in ny, usa
Posts: 9,813
Likes: 0
Received 9 Likes
on
9 Posts
Re: Rebuilding a 98 LS engine for Forced Induction. Need suggestions on parts? (shortdahri)
pick your choice of name brand pistons (cp, arias, je, wiseco and so on)
eagle rods with arp 3/8 bolts
aftermarket sleeving or block guard are not necessary, especially if you plan on staying below 350-400whp.
crower 402T cams and matching valvetrain
aftermarket intake manifold (blox, skunk)
arp headstuds.
done. thats the setup i had planned, and actually had half done (wisecos and eagles in my block) but i changed to a vtec head.
eagle rods with arp 3/8 bolts
aftermarket sleeving or block guard are not necessary, especially if you plan on staying below 350-400whp.
crower 402T cams and matching valvetrain
aftermarket intake manifold (blox, skunk)
arp headstuds.
done. thats the setup i had planned, and actually had half done (wisecos and eagles in my block) but i changed to a vtec head.
Thread
Thread Starter
Forum
Replies
Last Post
projectTeG
All Motor / Naturally Aspirated
17
10-04-2008 10:20 AM
Dancing is Forbidden
Classifieds: Forced Induction
6
07-07-2003 08:36 PM