re-grind for y7? turbo, headwork
#1
B*a*n*n*e*d
Thread Starter
Join Date: Apr 2004
Location: Malt in yor moulth, boston
Posts: 3,904
Likes: 0
Received 1 Like
on
1 Post
re-grind for y7? turbo, headwork
what kinda cam should i get for a y7, lot's of headwork, reworked bowls with massive air volume. Intake ports have been reshaped, and the hole head will flow a great deal more. What kinda re-grind should i get, little more duration with a lot more lifter, more duration with longer lift?.. anyone wanna help me get a cam for my head.
If it matters, d16y7 head, valves/springs/ret's, sc50 turbo, built bottom end. I have the stock y8 intake, opened all the runners up, and polished the penlum. Also ported matched the throttlebody to the penlum, 65mm.
Any help would be great
If it matters, d16y7 head, valves/springs/ret's, sc50 turbo, built bottom end. I have the stock y8 intake, opened all the runners up, and polished the penlum. Also ported matched the throttlebody to the penlum, 65mm.
Any help would be great
Thread
Thread Starter
Forum
Replies
Last Post
kid-honda
Forced Induction
2
11-11-2003 02:50 PM