Question regarding drag kit oil pan tap
#1
Thread Starter
Join Date: Sep 2004
Location: Las Vegas, NV, US
Posts: 249
Likes: 0
Received 0 Likes
on
0 Posts
Question regarding drag kit oil pan tap
I've searched plenty and looked at the various threads discussing all the different pan tap locations, etc. I know where to tap, more or less, but I was wondering if anyone had a picture of their oil pan setup using the parts included with the drag gen 3 kit.
If you don't have pictures, a description of how the line runs from turbo -> pan, using the parts included, would be immensely useful.
Sorry to post about something that seems to be a widely common topic ... but I have a bajillion unused fittings and whatnot from the included FMU setup (switched to rc440s/aem ems/walbro pump later .. wasted money on the fmu ****), and I'm just not 100% sure on which parts are best to use.
Thanks.
If you don't have pictures, a description of how the line runs from turbo -> pan, using the parts included, would be immensely useful.
Sorry to post about something that seems to be a widely common topic ... but I have a bajillion unused fittings and whatnot from the included FMU setup (switched to rc440s/aem ems/walbro pump later .. wasted money on the fmu ****), and I'm just not 100% sure on which parts are best to use.
Thanks.
Thread
Thread Starter
Forum
Replies
Last Post