PTE T67...Any good?
12-15-2009, 07:28 PM
#1
Honda-Tech Member
Thread Starter
Join Date: Feb 2006
Location: Spokane, WA, USA
Posts: 278
Likes: 0
Received 0 Likes
on
0 Posts
PTE T67...Any good?
So i picked this up from my buddy who ran this turbo on his 9.60 DSM. he was at 38psi, 75shot and an auto. IM just wondering how this will work on my setup?
Its a Precision T67 dual ball bearing. The hot side is a .68 A/R and the cold is .75. Im looking for around 650-800. Should this work or shold i look at a bigger turbine housing?
Its a Precision T67 dual ball bearing. The hot side is a .68 A/R and the cold is .75. Im looking for around 650-800. Should this work or shold i look at a bigger turbine housing?
12-15-2009, 07:49 PM
#3
Re: PTE T67...Any good?
Regardless, for top-end power, 650whp, sure. 750whp, really, REALLY pushing it. 800whp,? no.
Turbine housing is not the limiting factor. It is the turbine wheel itself, as well as the aerodynamics of the 66.5mm wheel. It's old tech, but it works.
Turbine housing is not the limiting factor. It is the turbine wheel itself, as well as the aerodynamics of the 66.5mm wheel. It's old tech, but it works.
12-15-2009, 07:52 PM
#4
Honda-Tech Member
Thread Starter
Join Date: Feb 2006
Location: Spokane, WA, USA
Posts: 278
Likes: 0
Received 0 Likes
on
0 Posts
Re: PTE T67...Any good?
Im on an AEBS sleeved, 83mm, 9.7 to 1. AFI top-mount, 2.5" pipe, JG/Edelbrock Victor-X. Nothin too crazy. id be pretty happy right now with 650-750. I picked it up for $650.
Thread
Thread Starter
Forum
Replies
Last Post
