Any updates of this build?
|
god that shit is scary, i rode in a 560whp eg coupe (h22, yes i know you are proud of your h23, but its the same series of engine) anyways it was my tuners car and we were spinning his tires at 90mph it looked litterally like my life was in fast forward lol.
|
Re: (big-cat)
Here's some shots of the custom IC piping kit that we put together for Jimmy. Let us know how it turns out Jimmy... you should definetely make 500whp. We have a customers 4th gen here that we are looking at making close to 600whp with. H23's get very little respect, lol.
http://www.av-engineered.com/custome...cts/Kit_02.jpg http://www.av-engineered.com/custome...cts/Kit_01.jpg |
Re: (PrecisionH23a)
https://honda-tech.com/forums/images...es/emsmile.gif whoa!!!Nice killer job on the piping
|
very nice i like, keep us updated.
|
where did you get your valves from?
|
Re: (jwyndsdime)
is he even alive? he hasn't posted since june 2nd?
|
Re: Project 500whp h23 (jwyndsdime)
|
Re: Project 500whp h23 (boostedgsr1234)
hey guys I haven't touched the car since june. I have been extremely busy between working and keeping my grades up in college. I will let you guys know when it is finished.
|
Re: Project 500whp h23 (jwyndsdime)
c'mon you can do both https://honda-tech.com/forums/images...s/emsmilep.gif don't be a slave to the books
|
Re: Project 500whp h23 (gogunkergorilla)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by gogunkergorilla »</TD></TR><TR><TD CLASS="quote">c'mon you can do both https://honda-tech.com/forums/images...s/emsmilep.gif don't be a slave to the books</TD></TR></TABLE>
eff school! car comes first https://honda-tech.com/forums/images...s/emsmilep.gif hahaha j/k man yeah finish school make big buck$$$ then u can really go all out https://honda-tech.com/forums/images/smilies/emthup.gif |
Re: Project 500whp h23
are you running the AEM ems? If so, i can send you my calibration files... I have a built F22 which is damn near the same motor...except i'm 85.5mm bore. The F22a and H23 use the same 95mm crankshaft... I have a 15psi cal and a 20psi cal... This was for a 60-1 turbo and 850cc injectors, so it would only be a minor change for your 1000... Let me know if you want them... good luck...
|
Re: Project 500whp h23 (fast93accord)
i have the hondata s300 https://honda-tech.com/forums/images/smilies/emthup.gif
|
how much did you spend on the all the parts
|
Re: (sihseries)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by sihseries »</TD></TR><TR><TD CLASS="quote">how much did you spend on the all the parts</TD></TR></TABLE>
way too much. over 10k. |
Re: (jwyndsdime)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by jwyndsdime »</TD></TR><TR><TD CLASS="quote">
way too much. over 10k.</TD></TR></TABLE> lemme guess...college loan refunds???? https://honda-tech.com/forums/images...s/emsmilep.gif |
Re: (gogunkergorilla)
the car is up and running https://honda-tech.com/forums/images/smilies/emthup.gif
I currently have it tuned for 10psi due to the stock MAP. I am going to put the new 3 bar in tonight and tune it for 25psi. I will keep you guys posted. |
Re: (jwyndsdime)
Nice job. my turbo h23 owned my turbo h22 prelude. I love the torque on the h23mmmm. Great job. nice parts. Im in for results.
|
All times are GMT -8. The time now is 06:00 AM. |
© 2024 MH Sub I, LLC dba Internet Brands