prayoonto stg2 cams 816hp,644tq on Nos51's Carrot
#1
Honda-Tech Member
Thread Starter
Join Date: May 2003
Location: miami, fl, usa
Posts: 1,335
Likes: 0
Received 0 Likes
on
0 Posts
prayoonto stg2 cams 816hp,644tq on Nos51's Carrot
Finally got to make some decent passes on my eg/Carrot last night after running into some electrical issues and frustration i got it all figured out.i took out the fererra rockers and put the stock rockers to get some drivability back since i drive the car on the street pretty often.cams picked up about 50hp over the stock cams best part is no chain slap,no phantom knock like you get with other aftermarkets cams which was a big concern of mines before i bought them.thanks again the Chris(bluehatch) for taking care of me and helping me with all my questions and guiding me the right way!im really happy with the results and now im ready to hit the track which should be at the next nscra event in a few weeks.quick run down of the setup:
k20z1 block, stock sleeves
je pistons eagle rods
fererra valve train and valves
prayoonto stg 2 cams
precision billet 6265 bb .82 back
E-85
here is the before and after graph with the stock cams vs the prayoonto stg 2s.they are not from the same day.the wierd dip in the begining is from tire spin(sorry for the crappy phone pics)
k20z1 block, stock sleeves
je pistons eagle rods
fererra valve train and valves
prayoonto stg 2 cams
precision billet 6265 bb .82 back
E-85
here is the before and after graph with the stock cams vs the prayoonto stg 2s.they are not from the same day.the wierd dip in the begining is from tire spin(sorry for the crappy phone pics)
Last edited by nos51; 09-29-2010 at 07:44 AM.
Thread
Thread Starter
Forum
Replies
Last Post