post your SOHC turbo setups
#3
Honda-Tech Member
Join Date: Mar 2002
Location: sacramento, ca, usa
Posts: 3,818
Likes: 0
Received 0 Likes
on
0 Posts
Re: post your SOHC turbo setups (turbozxi)
if you bothered to look in the FAQ's this thread was in there...
https://honda-tech.com/zerothread?id=1067168
https://honda-tech.com/zerothread?id=1067168
#7
Senior Member
Join Date: May 2004
Location: louisville, ky, USA
Posts: 1,017
Likes: 0
Received 0 Likes
on
0 Posts
Re: (game over)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by game over »</TD></TR><TR><TD CLASS="quote">all those cars arent even in the 12s im trying to run low 11s</TD></TR></TABLE>
Dude.... GAME OVER!!!!!!!
Dude.... GAME OVER!!!!!!!
Trending Topics
#8
Re: post your SOHC turbo setups (game over)
You can check out my mod list at http://www.cardomain.com/id/rbr20
I went 12.3@118mph on drag radials making 288whp. At the end of last year I crank the boost up to 22psi 418whp and broke a axle. This year I'm running better axles and it should run low 11's no problem.
I went 12.3@118mph on drag radials making 288whp. At the end of last year I crank the boost up to 22psi 418whp and broke a axle. This year I'm running better axles and it should run low 11's no problem.
#9
Honda-Tech Member
Thread Starter
Join Date: Nov 2003
Location: Tulsa, ok
Posts: 1,229
Likes: 0
Received 0 Likes
on
0 Posts
Re: (W O T)
dude you dont know me what kind of times are you running? what you dont think it can be done on a SOHC where im from there is a eg hatch full street trim running 11.20s a TRUE STREET CAR
#12
Honda-Tech Member
Join Date: May 2003
Location: Portland, Oregon
Posts: 5,735
Likes: 0
Received 0 Likes
on
0 Posts
Re: (game over)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by game over »</TD></TR><TR><TD CLASS="quote">..where im from there is a eg hatch full street trim running 11.20s a TRUE STREET CAR </TD></TR></TABLE>
You mean with an interior etc.?
I thought you couldn't run faster than 12.0 without a proper roll cage?
Not sure if I believe it... but if it is true... a <12.0 sec street SOHC is pretty impressive...
What's the set up?
You mean with an interior etc.?
I thought you couldn't run faster than 12.0 without a proper roll cage?
Not sure if I believe it... but if it is true... a <12.0 sec street SOHC is pretty impressive...
What's the set up?
#14
Honda-Tech Member
Thread Starter
Join Date: Nov 2003
Location: Tulsa, ok
Posts: 1,229
Likes: 0
Received 0 Likes
on
0 Posts
Re: (EJ1 wilcox)
it was a build z6 turbo from humble performance. i dont know the complete set-up.we know people at the local track and they let it slide...the car had NO cage..
and if you think im lying ask 8seceg and im sure he can show you the video
and if you think im lying ask 8seceg and im sure he can show you the video
#15
Re: (game over)
Very reassuring
I go to the track to be safe and to take it off the streets, when people with friends are aloud to run with sub-par setups and Im sure many people run with **** that shouldnt be run with
Im racing at 200kmph beside them and there tire decides to shoot my way, I dont think Id be to happy with that inspector
ohhhhh well eh
I go to the track to be safe and to take it off the streets, when people with friends are aloud to run with sub-par setups and Im sure many people run with **** that shouldnt be run with
Im racing at 200kmph beside them and there tire decides to shoot my way, I dont think Id be to happy with that inspector
ohhhhh well eh
#16
OG triple OG
Re: (game over)
2000 y8
aebs sleeves
cp 75mm 9:1 pistons
pauter rods
full balance and blueprint
stock head , intake manifold and trottle body(for now and not for long)
gt35 63 trim
spoolinperformance mani , 3in dp and dumptube
tial 38mm
rc750's
hondata s200b
made 263whp 247tq at 13 lbs with a misfire.
building the top end up and going for 400 for a nice little street car.
aebs sleeves
cp 75mm 9:1 pistons
pauter rods
full balance and blueprint
stock head , intake manifold and trottle body(for now and not for long)
gt35 63 trim
spoolinperformance mani , 3in dp and dumptube
tial 38mm
rc750's
hondata s200b
made 263whp 247tq at 13 lbs with a misfire.
building the top end up and going for 400 for a nice little street car.
#17
stock d16z6
y8 tranny (as soon as I put it on)
t3 super 60 (off nissan single turbo car)
fmu 12:1 (till I get my 450cc in)
2 1/4 " custom charge pipe
1g dsm bov
bmc old style manifold
2 1/2 " tig welded downpipe (ends at oil pan)
2 check valves
autometer boost guage
running 5 psi. pulls hard but cant wait to run uberdata up it to 10 psi and throw a xtss in.
y8 tranny (as soon as I put it on)
t3 super 60 (off nissan single turbo car)
fmu 12:1 (till I get my 450cc in)
2 1/4 " custom charge pipe
1g dsm bov
bmc old style manifold
2 1/2 " tig welded downpipe (ends at oil pan)
2 check valves
autometer boost guage
running 5 psi. pulls hard but cant wait to run uberdata up it to 10 psi and throw a xtss in.
#21
Honda-Tech Member
Join Date: Jul 2002
Location: Tri Cities Diddy, IL
Posts: 1,665
Likes: 0
Received 0 Likes
on
0 Posts
Re: (game over)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by game over »</TD></TR><TR><TD CLASS="quote">who would be the best person to talk to about buildin this SOHC turbo beast</TD></TR></TABLE>
In no particular order
1) Your mom
2) TurbodCX
3) Howard from AR Fab
4) Matt aka Zex man
5) M.a.r.c.
6) GITWIDIT
7) ME
8) Ladysman
ETC.. To set up a SOHC that runs low 11's you will either need DEEP pockets, or deep pockets and a lot of time
In no particular order
1) Your mom
2) TurbodCX
3) Howard from AR Fab
4) Matt aka Zex man
5) M.a.r.c.
6) GITWIDIT
7) ME
8) Ladysman
ETC.. To set up a SOHC that runs low 11's you will either need DEEP pockets, or deep pockets and a lot of time
#23
Honda-Tech Member
Join Date: May 2002
Location: Illanoise, USA
Posts: 3,448
Likes: 0
Received 0 Likes
on
0 Posts
Re: (Boltz)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by Boltz »</TD></TR><TR><TD CLASS="quote">
In no particular order
1) Your mom
2) TurbodCX
3) Howard from AR Fab
4) Matt aka Zex man
5) M.a.r.c.
6) GITWIDIT
7) ME
8) Ladysman
ETC.. To set up a SOHC that runs low 11's you will either need DEEP pockets, or deep pockets and a lot of time
</TD></TR></TABLE>
Don't forget some luck. I sure as hell don't have that!
In no particular order
1) Your mom
2) TurbodCX
3) Howard from AR Fab
4) Matt aka Zex man
5) M.a.r.c.
6) GITWIDIT
7) ME
8) Ladysman
ETC.. To set up a SOHC that runs low 11's you will either need DEEP pockets, or deep pockets and a lot of time
</TD></TR></TABLE>
Don't forget some luck. I sure as hell don't have that!
#25
Honda-Tech Member
Join Date: Oct 2001
Location: Pembroke Pines, Florida, United States
Posts: 6,024
Likes: 0
Received 0 Likes
on
0 Posts
Re: (ladysman)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by ladysman »</TD></TR><TR><TD CLASS="quote">Don't forget some luck. I sure as hell don't have that!</TD></TR></TABLE>
i share your pain
i share your pain