post your 81mm t3/t67 dyno sheets. pump gas please !
#1
Honda-Tech Member
Thread Starter
post your 81mm t3/t67 dyno sheets. pump gas please !
looking to see what others are making with their t3/t67s.
b-series only please.
please include.
1. engine setup(built or stock)
2. manifold (manufacturer)
3. boost level
4. downpipe/exhuast size
thanks folks
b-series only please.
please include.
1. engine setup(built or stock)
2. manifold (manufacturer)
3. boost level
4. downpipe/exhuast size
thanks folks
#2
Honda-Tech Member
Thread Starter
Re: post your 81mm t3/t67 dyno sheets. pump gas please ! (Dturbocivic)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by Dturbocivic »</TD></TR><TR><TD CLASS="quote">
please include.
1. ls/vtec 81.5/gsr head fully built
2. rpi racing(manufacturer)
3. 18-20 psi
4. 3inch dp/2.5inch exhuast
thanks folks
</TD></TR></TABLE>
tuned by Richie @ philly dynoworks on crome
run# 11 was on the wg only
run#22 w/boost controller crank'd
Modified by Dturbocivic at 5:56 PM 3/15/2006
please include.
1. ls/vtec 81.5/gsr head fully built
2. rpi racing(manufacturer)
3. 18-20 psi
4. 3inch dp/2.5inch exhuast
thanks folks
</TD></TR></TABLE>
tuned by Richie @ philly dynoworks on crome
run# 11 was on the wg only
run#22 w/boost controller crank'd
Modified by Dturbocivic at 5:56 PM 3/15/2006
#3
Honda-Tech Member
Re: post your 81mm t3/t67 dyno sheets. pump gas please ! (Dturbocivic)
bump for interest have you concidered the gt35e?from what ive seen the gt makes more power in the 20-25 psi range
#4
Re: post your 81mm t3/t67 dyno sheets. pump gas please ! (h22 civic)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by h22 civic »</TD></TR><TR><TD CLASS="quote">bump for interest have you concidered the gt35e?from what ive seen the gt makes more power in the 20-25 psi range</TD></TR></TABLE>
He already has a T3/T67 HO setup running.
He already has a T3/T67 HO setup running.
#5
Honda-Tech Member
Thread Starter
Re: post your 81mm t3/t67 dyno sheets. pump gas please ! (boosted92)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by boosted92 »</TD></TR><TR><TD CLASS="quote">
He already has a T3/T67 HO setup running.</TD></TR></TABLE>
ya, im not about to spend more money on this upgrading. just wanted to see how my setup fairs with other users setups. im very happy with this current setup.
He already has a T3/T67 HO setup running.</TD></TR></TABLE>
ya, im not about to spend more money on this upgrading. just wanted to see how my setup fairs with other users setups. im very happy with this current setup.
Trending Topics
#10
Shooting Star
Join Date: Jan 2006
Location: The Lou, MO, US
Posts: 4,408
Likes: 0
Received 0 Likes
on
0 Posts
Re: post your 81mm t3/t67 dyno sheets. pump gas please ! (Dturbocivic)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by Dturbocivic »</TD></TR><TR><TD CLASS="quote"> im very happy with this current setup. </TD></TR></TABLE>
Im gonna say if your happy with it and your making 434 whp that speaks for itself. You have one sick setup
Im gonna say if your happy with it and your making 434 whp that speaks for itself. You have one sick setup
#13
Honda-Tech Member
Thread Starter
Re: post your 81mm t3/t67 dyno sheets. pump gas please ! (Full-Race Javier)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by Full-Race Javier »</TD></TR><TR><TD CLASS="quote">there are a few T3/T67 dyno plots in here </TD></TR></TABLE>
i need a boost guage ..
thanks for your input that is awsome for your customers/potential customers to look at!!!
Modified by Dturbocivic at 6:09 AM 3/14/2006
i need a boost guage ..
thanks for your input that is awsome for your customers/potential customers to look at!!!
Modified by Dturbocivic at 6:09 AM 3/14/2006
#14
Honda-Tech Member
Join Date: Jan 2004
Location: Atlantis
Posts: 724
Likes: 0
Received 0 Likes
on
0 Posts
Re: post your 81mm t3/t67 dyno sheets. pump gas please ! (Dturbocivic)
Bump for some more info . Im gonna get my car up and running soon with the same turbo i got a 81mm B18C4(GSR),stock sleeves, CP's and manley rods,supertech top end, t3/t67 .82ar. 3" turbo back exhaust, Ramhorn mani etc etc etc.
Hoping to get between 400hp-450hp.
Hoping to get between 400hp-450hp.
#15
Honda-Tech Member
Re: post your 81mm t3/t67 dyno sheets. pump gas please ! (f1 vtec)
Dave I made something like 470/285 with my .82 non-HO t3/67 on my (previous) setup at around 14-15 psi. This was on a tuning session where my clutch started to slip (ever see a dyno chart with a loop in it lol) so I pretty much didnt get a chance to add any timing (20 degrees up top) or get a/f out of the low 11's on pump. This was on a dynapack dyno.
Of course a Full Race prostreet manifold
9:1 83mm gsr
stock port head
ITR intake/gsr exhaust cams
Edelbrock intake
Your new S2000 throttle body
3" turbo back
Of course a Full Race prostreet manifold
9:1 83mm gsr
stock port head
ITR intake/gsr exhaust cams
Edelbrock intake
Your new S2000 throttle body
3" turbo back
#16
Honda-Tech Member
Join Date: Jan 2004
Location: Atlantis
Posts: 724
Likes: 0
Received 0 Likes
on
0 Posts
Re: post your 81mm t3/t67 dyno sheets. pump gas please ! (93LSivic)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by 93LSivic »</TD></TR><TR><TD CLASS="quote">Dave I made something like 470/285 with my .82 non-HO t3/67 on my (previous) setup at around 14-15 psi. This was on a tuning session where my clutch started to slip (ever see a dyno chart with a loop in it lol) so I pretty much didnt get a chance to add any timing (20 degrees up top) or get a/f out of the low 11's on pump. This was on a dynapack dyno.
Of course a Full Race prostreet manifold
9:1 83mm gsr
stock port head
ITR intake/gsr exhaust cams
Edelbrock intake
Your new S2000 throttle body
3" turbo back</TD></TR></TABLE>
Id be more than happy with figures like that of mine, when did you spool it and when did u see full boost?
Of course a Full Race prostreet manifold
9:1 83mm gsr
stock port head
ITR intake/gsr exhaust cams
Edelbrock intake
Your new S2000 throttle body
3" turbo back</TD></TR></TABLE>
Id be more than happy with figures like that of mine, when did you spool it and when did u see full boost?
#17
Honda-Tech Member
Thread Starter
Re: post your 81mm t3/t67 dyno sheets. pump gas please ! (93LSivic)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by 93LSivic »</TD></TR><TR><TD CLASS="quote">Dave I made something like 470/285 with my .82 non-HO t3/67 on my (previous) setup at around 14-15 psi. This was on a tuning session where my clutch started to slip (ever see a dyno chart with a loop in it lol) so I pretty much didnt get a chance to add any timing (20 degrees up top) or get a/f out of the low 11's on pump. This was on a dynapack dyno.
Of course a Full Race prostreet manifold
9:1 83mm gsr
stock port head
ITR intake/gsr exhaust cams
Edelbrock intake
Your new S2000 throttle body
3" turbo back</TD></TR></TABLE>
damn, that is impressive. 470 @ only 14-15 psi especially with the a/f and clutch like that.
Of course a Full Race prostreet manifold
9:1 83mm gsr
stock port head
ITR intake/gsr exhaust cams
Edelbrock intake
Your new S2000 throttle body
3" turbo back</TD></TR></TABLE>
damn, that is impressive. 470 @ only 14-15 psi especially with the a/f and clutch like that.
#20
Mr. Badwrench
Join Date: May 2002
Location: stranger in a strange land
Posts: 14,146
Likes: 0
Received 2 Likes
on
2 Posts
Re: post your 81mm t3/t67 dyno sheets. pump gas please ! (93LSivic)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by 93LSivic »</TD></TR><TR><TD CLASS="quote">Dave I made something like 470/285 with my .82 non-HO t3/67 on my (previous) setup at around 14-15 psi. This was on a tuning session where my clutch started to slip (ever see a dyno chart with a loop in it lol) so I pretty much didnt get a chance to add any timing (20 degrees up top) or get a/f out of the low 11's on pump. This was on a dynapack dyno.
Of course a Full Race prostreet manifold
9:1 83mm gsr
stock port head
ITR intake/gsr exhaust cams
Edelbrock intake
Your new S2000 throttle body
3" turbo back</TD></TR></TABLE>
i remember that night. i can vouch for the dyno plot with the loop in it, as i made one too. good ole' c.m. stage 4.
Of course a Full Race prostreet manifold
9:1 83mm gsr
stock port head
ITR intake/gsr exhaust cams
Edelbrock intake
Your new S2000 throttle body
3" turbo back</TD></TR></TABLE>
i remember that night. i can vouch for the dyno plot with the loop in it, as i made one too. good ole' c.m. stage 4.
#21
Honda-Tech Member
Thread Starter
Re: post your 81mm t3/t67 dyno sheets. pump gas please ! (boostedcivicsir)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by boostedcivicsir »</TD></TR><TR><TD CLASS="quote">i remember that night. i can vouch for the dyno plot with the loop in it, as i made one too. good ole' c.m. stage 4. </TD></TR></TABLE>
i posted in your other thread, but do you have any #'s from your setup?
i posted in your other thread, but do you have any #'s from your setup?
#24
Honda-Tech Member
iTrader: (1)
Join Date: Jun 2003
Location: Turbo land, GA, USA
Posts: 1,984
Likes: 0
Received 0 Likes
on
0 Posts
Re: post your 81mm t3/t67 dyno sheets. pump gas please ! (Boostage)
Heres mine
Gsr 1.8
9.1 CP pistons
Pauter Rods
Nekuin Manifold
40mm Tial Wastegate
This was on 880Cc injectors!!
Gsr 1.8
9.1 CP pistons
Pauter Rods
Nekuin Manifold
40mm Tial Wastegate
This was on 880Cc injectors!!
#25
Honda-Tech Member
Re: post your 81mm t3/t67 dyno sheets. pump gas please ! (dturbocivic)
here is mine , on a 81.5mm bore , it is a dual bb H.O. .82 exhaust side
Modified by B18C1CYA at 11:13 PM 7/12/2006
Modified by B18C1CYA at 11:13 PM 7/12/2006