plxm300 wideband not working...?
#1
Honda-Tech Member
Thread Starter
plxm300 wideband not working...?
it seems as though it just quite last night. on start up it reads about 14.87 and then it goes into the 15's and then it goes LEAN and then switches to RICH and stays are rich. i havnt changed my chip at all. im wondering if the display is fried? just before this started to happen the LED display was doing through numbers really really fast. for example it would read 12.13 and then 15.34 and then 17.56 and then go back to 14.6 all in a split of a second. any ideas?
#3
Honda-Tech Member
Thread Starter
Re: plxm300 wideband not working...? (dturbocivic)
found the problem. my wires were rubbing the axle and one of the wries was through the insulation so the metal contact must have been giving it a weird signal. but it works fine now.
Thread
Thread Starter
Forum
Replies
Last Post
ebp_dc2
Forced Induction
7
07-16-2007 06:35 PM