Please inspect my used eagle rods -PICS-
03-23-2005, 06:21 AM
#1
Honda-Tech Member
Thread Starter
Please inspect my used eagle rods -PICS-
Does this look normal for a set of used eagle rods??? Should i get them resized half a thou ? My machinest hasn't seen them yet...
(these are as clean as i can get them!)
(these are as clean as i can get them!)
03-23-2005, 06:28 AM
#3
Honda-Tech Member
Thread Starter
Re: Please inspect my used eagle rods -PICS- (earl)
haha the man i wanted to hear from the most replies first! good stuff earl, thanks man 
03-23-2005, 06:57 AM
#5
Honda-Tech Member
Join Date: Jul 2002
Location: Tri Cities Diddy, IL
Posts: 1,665
Likes: 0
Received 0 Likes
on
0 Posts
Re: Please inspect my used eagle rods -PICS- (earl)
Although earl knows better, I would still take them to my machinist so he can see them in real life, just in case.
03-23-2005, 06:58 AM
#6
Honda-Tech Member
Thread Starter
Re: (yellowturbo)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by yellowturbo »</TD></TR><TR><TD CLASS="quote">you cant judge a rod on a picture. You have to take a lot of time to take the measurement and the specs.
</TD></TR></TABLE>
huh? you get your machinest to mount a pin and check for straightness and check the big end bearing clearances at the crank.
</TD></TR></TABLE>
huh? you get your machinest to mount a pin and check for straightness and check the big end bearing clearances at the crank.
Thread
Thread Starter
Forum
Replies
Last Post
phantomeg6
All Motor / Naturally Aspirated
48
04-29-2007 05:07 PM
