Pictures of a viper/ferrari/vtec/whatever killer
#1
Junior Member
Thread Starter
Join Date: Nov 2006
Location: tokyo, drift, japan
Posts: 62
Likes: 0
Received 0 Likes
on
0 Posts
Pictures of a viper/ferrari/vtec/whatever killer
new pics:
older pics:
heres the mods, out of order but blah
CP pistons 40 over
ARP head studs
ARP crank stud
ARP crank bolts
Power enterprises crank bearing
Carillo forged A-beam rods
clevite engine bearings
Ferrea valve springs and retainers
Ferrea valve locks
BL 3mm headgasket
RPS clutch
t4/t67 .96ar garret turbo
full-race exhaust manifold
virtualworks intake manifold
apex'i gt intercooler
4" intercooler piping on intake side, 3" on turbo side
BL crank pulley
fluidyne radiator
AAP dual electric fans
mezier electric water pump
unorthodox cam gears
unorthodox ps and alternator pulley
greddy ti exhaust
full race 4" downpipe and midpipe
dual tial 44mm wastegates
4" long intake filter
greddy irridium plugs
walbro fuel pump
greddy oil catch can
gte valve covers and spark cover
mild port and polish to head as well as all the other machine work to the block and crank
defi gauges oil press, fuel press, egt, and control unit
greddy profec b spec 2 ebc
greddy turbo timer
hks vpc
apex safc ii
various polishing and coating of parts
older pics:
heres the mods, out of order but blah
CP pistons 40 over
ARP head studs
ARP crank stud
ARP crank bolts
Power enterprises crank bearing
Carillo forged A-beam rods
clevite engine bearings
Ferrea valve springs and retainers
Ferrea valve locks
BL 3mm headgasket
RPS clutch
t4/t67 .96ar garret turbo
full-race exhaust manifold
virtualworks intake manifold
apex'i gt intercooler
4" intercooler piping on intake side, 3" on turbo side
BL crank pulley
fluidyne radiator
AAP dual electric fans
mezier electric water pump
unorthodox cam gears
unorthodox ps and alternator pulley
greddy ti exhaust
full race 4" downpipe and midpipe
dual tial 44mm wastegates
4" long intake filter
greddy irridium plugs
walbro fuel pump
greddy oil catch can
gte valve covers and spark cover
mild port and polish to head as well as all the other machine work to the block and crank
defi gauges oil press, fuel press, egt, and control unit
greddy profec b spec 2 ebc
greddy turbo timer
hks vpc
apex safc ii
various polishing and coating of parts
#3
Honda-Tech Member
Join Date: May 2001
Location: Tallahassee, FL, US
Posts: 7,190
Likes: 0
Received 0 Likes
on
0 Posts
Re: Pictures of a viper/ferrari/vtec/whatever killer (Fitti)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by Fitti »</TD></TR><TR><TD CLASS="quote">Looks like this shell just came from the Fast and Furious set </TD></TR></TABLE>
getting parts overnighted from Japan
getting parts overnighted from Japan
#6
Junior Member
Thread Starter
Join Date: Nov 2006
Location: tokyo, drift, japan
Posts: 62
Likes: 0
Received 0 Likes
on
0 Posts
Re: (Jared)
haha, i need to make a spoof of it or something. im still waiting on my "overnight parts from japan" ordered the trial rear and sides back in september, not here yet, its a 4 month wait =,(
Trending Topics
#10
Join Date: Jun 2004
Location: Southbury, CT, United States
Posts: 206
Likes: 0
Received 0 Likes
on
0 Posts
Re: Pictures of a viper/ferrari/vtec/whatever killer (Snowfox)
all that stuff to power the supra and all youre going to use is an safc. why skimp on the engine management.
#12
Junior Member
Thread Starter
Join Date: Nov 2006
Location: tokyo, drift, japan
Posts: 62
Likes: 0
Received 0 Likes
on
0 Posts
Re: Pictures of a viper/ferrari/vtec/whatever killer (budget)
i kow that they have roughly 500 horsepower and generally run high 11s to low 12s, and i also know that 1,000RWHP is more than enough to leave a little american car in the dust = )
#13
Honda-Tech Member
Join Date: Sep 2003
Location: MD
Posts: 2,322
Likes: 0
Received 0 Likes
on
0 Posts
Re: Pictures of a viper/ferrari/vtec/whatever killer (Snowfox)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by Snowfox »</TD></TR><TR><TD CLASS="quote">i kow that they have roughly 500 horsepower and generally run high 11s to low 12s, and i also know that 1,000RWHP is more than enough to leave a little american car in the dust = )</TD></TR></TABLE>
good luck making 1000hp on a t67 and an afc...
good luck making 1000hp on a t67 and an afc...
#14
Junior Member
Thread Starter
Join Date: Nov 2006
Location: tokyo, drift, japan
Posts: 62
Likes: 0
Received 0 Likes
on
0 Posts
Re: (Boner_Ben)
because i'm in arizona and would like to keep my air conditioner... i'd rather sacrafice a few horsepower than roast my *** off, the AC wont work with AEM EMS, and the afc and vpc combo can control 1000cc injectors no problem anyways
#15
Junior Member
Thread Starter
Join Date: Nov 2006
Location: tokyo, drift, japan
Posts: 62
Likes: 0
Received 0 Likes
on
0 Posts
Re: (Snowfox)
i dont think a 3.4L inline 6 24valve twin cam will have any problems making 1000rwhp at 35 psi considering 3.0l stock block and head supras make 800rwhp on t67 with .84 housing on 30 psi.
#18
Honda-Tech Member
Join Date: Aug 2004
Location: Mechanicsville VA
Posts: 2,318
Likes: 0
Received 0 Likes
on
0 Posts
Re: Pictures of a viper/ferrari/vtec/whatever killer (Snowfox)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by Snowfox »</TD></TR><TR><TD CLASS="quote">i kow that they have roughly 500 horsepower and generally run high 11s to low 12s, and i also know that 1,000RWHP is more than enough to leave a little american car in the dust = )</TD></TR></TABLE>
All I can say is good luck trying to run one that isnt stock.... Because you will get your *** handed to you in a paper bag ....... there are a LOT of guys out there with bolt on twin turbo's pushing the 1000rwhp mark on 12 psi and stock motors..... not to shabby for a "little american car"
There are a good amount of 2000+rwhp Vipers out there also that are running 0-200 mph in under 20 seconds
All I can say is good luck trying to run one that isnt stock.... Because you will get your *** handed to you in a paper bag ....... there are a LOT of guys out there with bolt on twin turbo's pushing the 1000rwhp mark on 12 psi and stock motors..... not to shabby for a "little american car"
There are a good amount of 2000+rwhp Vipers out there also that are running 0-200 mph in under 20 seconds
#19
Re: (Snowfox)
i can vouch for him, car is gonna be pretty bad ***. i remember when he first got it and ****, he couldnt stop talkin bout it. so ya, just wait til he gets it all done and what not. talk to ya later tyler.
#20
Honda-Tech Member
Join Date: Sep 2003
Location: MD
Posts: 2,322
Likes: 0
Received 0 Likes
on
0 Posts
Re: (wshrader08)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by wshrader08 »</TD></TR><TR><TD CLASS="quote">i can vouch for him, car is gonna be pretty bad ***.</TD></TR></TABLE>
Oh **** nevermind then! all hail snowfox's fast and furious supra.
Oh **** nevermind then! all hail snowfox's fast and furious supra.
#21
Junior Member
Thread Starter
Join Date: Nov 2006
Location: tokyo, drift, japan
Posts: 62
Likes: 0
Received 0 Likes
on
0 Posts
Re: (Jared)
nope, walbro wont hold 1k to the wheels. neither will the w58. but the setup is good for 1,000rwhp. guess none of you guys have seen wotm's supra?
#22
Re: (Snowfox)
yeah, everyone go look on http://www.supraforums.com and find him on there. builds nice and suped up supras and i believe other cars as well. WOTM is awesome, the cars they bring out are definately killers trust me, a lot faster than our hondas can go . oh well. i have a jeep as well, so if i was ever to race em i could ram 'em, then cross the finish line, lol
#24
Honda-Tech Member
Join Date: Sep 2003
Location: MD
Posts: 2,322
Likes: 0
Received 0 Likes
on
0 Posts
Re: (wshrader08)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by wshrader08 »</TD></TR><TR><TD CLASS="quote"> a lot faster than our hondas can go . </TD></TR></TABLE>
Is that right...
Is that right...