Pictures of oil return line set up with driver side dp exit
#1
Honda-Tech Member
Thread Starter
Join Date: Oct 2009
Posts: 412
Likes: 0
Received 0 Likes
on
0 Posts
Pictures of oil return line set up with driver side dp exit
Just curious to see how people set up their oil return line and where they drill the pan when they have driver side exit for the downpipe.
http://rosswerkz.com/images/turbo_ca...CF0038_002.jpg
i just dont want to end up with something like this ... =/
http://rosswerkz.com/images/turbo_ca...CF0038_002.jpg
i just dont want to end up with something like this ... =/
#4
Honda-Tech Member
iTrader: (1)
Join Date: Feb 2010
Location: latitude 39.6 longitude 78.9
Posts: 1,852
Likes: 0
Received 1 Like
on
1 Post
Re: Pictures of oil return line set up with driver side dp exit
Or some setups are just like that. I'm running a blox cast manifold with precision sc34 turbo and spoolin performance 3" down pipe. It comes out on the drivers side. I don't have any pics of the oil return setup. My pan is tapped almost at the top in the center. Return comes out of turbo and curves around the down pipe and into the pan. Misses the down pipe by about 2".
Thread
Thread Starter
Forum
Replies
Last Post
2kdrift
Forced Induction
16
01-28-2017 06:15 PM