opinions on setup im putting together
#1
Honda-Tech Member
Thread Starter
Join Date: Jul 2006
Location: CRESWELL, Oregon, 97426
Posts: 5,433
Likes: 0
Received 2 Likes
on
2 Posts
opinions on setup im putting together
im shipping out a block friday, and a head soon to follow.
setup
bottom end
Golden Eagle Godzilla sleeves
manley rods
wiseco pistons around 9.5:1
balanced
factory main bearings
acl rods bearings
head
portflow port, cc
supertech oversized valves
supertech springs and retainers
gsr cams, or turbo cams, just not sure on which ones.
do you think this is a good route, im rather happy with the plan i have came up with
will be going together with my current setup. turbonetics t3 62-1 turbo, custom equal length mani, aebs mani, 68mm tb, pwr air to water intercooler, 1000cc injectors, hondata, etc. basically with the motor described above and the turbo setup, plus nitrous, i want to make 650 whp. i currently have hit 463 on stock sleeves just turboed. let me know what you think :flame suit on:
setup
bottom end
Golden Eagle Godzilla sleeves
manley rods
wiseco pistons around 9.5:1
balanced
factory main bearings
acl rods bearings
head
portflow port, cc
supertech oversized valves
supertech springs and retainers
gsr cams, or turbo cams, just not sure on which ones.
do you think this is a good route, im rather happy with the plan i have came up with
will be going together with my current setup. turbonetics t3 62-1 turbo, custom equal length mani, aebs mani, 68mm tb, pwr air to water intercooler, 1000cc injectors, hondata, etc. basically with the motor described above and the turbo setup, plus nitrous, i want to make 650 whp. i currently have hit 463 on stock sleeves just turboed. let me know what you think :flame suit on:
Thread
Thread Starter
Forum
Replies
Last Post
wfocrx
All Motor / Naturally Aspirated
27
09-07-2015 08:53 AM
cloviskilla
Forced Induction
7
04-19-2009 10:35 AM