Okays heres the low down on more information on the MENG header from US.
09-27-2002, 12:21 PM
#1
Honda-Tech Member
Thread Starter
Join Date: Oct 2000
Location: Dallas/Miami, FL, USA
Posts: 11,155
Likes: 0
Received 0 Likes
on
0 Posts
Okays heres the low down on more information on the MENG header from US.
I took this header to http://www.Fabtechservices.com Chad Klodner which is local fabricator that does alot of work for me. HE is one of the best in the area over here at least in welding aluminum and many other fabrication stuff. He is well know in the mustang community as well you can check his car out on precisonte.com He is the one with the 1100hp gasonline mustang. He is also the one that helps tune the speed pro on the car to gain the maximum hp that we desire. He was the orginal person that was going to machine our manifolds in the beginning but for the price we couldnt do it back then.
He took a good look at this manfiold which everyone is stating is obx. It not obx. the nu-image aka meng is also the same as the VS racing meng as well as tony1 meng header they all come from the same place. He states "for the money this manifold is untouchable" that is when i told him these go for $720 most places though sell them for less than that which really is disgrace to the manifold. Its worth a hell of alot more. They are little heavy though he said compared to what he is accustomed to. The collector is deisgned well the tube and bends could be a little better. I also told him to see if he can make a mock of a new version of the True VS Racing manifold which is not going to be duplicated anywhere. end of story....... The price of that should compete very well. We do need a mock up GSR/LS or hybrid with AC in the DFW AREA that could assit we would gladly appreciate it.
Buy what you want.. thats all i can say..... these are good manifolds for the price.
[Modified by b18bturbo, 3:25 PM 9/27/2002]
He took a good look at this manfiold which everyone is stating is obx. It not obx. the nu-image aka meng is also the same as the VS racing meng as well as tony1 meng header they all come from the same place. He states "for the money this manifold is untouchable" that is when i told him these go for $720 most places though sell them for less than that which really is disgrace to the manifold. Its worth a hell of alot more. They are little heavy though he said compared to what he is accustomed to. The collector is deisgned well the tube and bends could be a little better. I also told him to see if he can make a mock of a new version of the True VS Racing manifold which is not going to be duplicated anywhere. end of story....... The price of that should compete very well. We do need a mock up GSR/LS or hybrid with AC in the DFW AREA that could assit we would gladly appreciate it.
Buy what you want.. thats all i can say..... these are good manifolds for the price.
[Modified by b18bturbo, 3:25 PM 9/27/2002]
09-27-2002, 02:12 PM
#2
Honda-Tech Member
Join Date: Jun 2002
Location: houston
Posts: 656
Likes: 0
Received 0 Likes
on
0 Posts
Re: Okays heres the low down on more information on the MENG header from US. (b18bturbo)
hey viren, ill volunteer my gsr.. 
dallas is only 3 hrs away and i dont mind leavn the car.
dallas is only 3 hrs away and i dont mind leavn the car.
09-27-2002, 02:21 PM
#3
Honda-Tech Member
Thread Starter
Join Date: Oct 2000
Location: Dallas/Miami, FL, USA
Posts: 11,155
Likes: 0
Received 0 Likes
on
0 Posts
Re: Okays heres the low down on more information on the MENG header from US. (roby)
okay that will be great.. and we can works something out.
[Modified by b18bturbo, 5:21 PM 9/27/2002]
[Modified by b18bturbo, 5:21 PM 9/27/2002]
09-27-2002, 02:31 PM
#4
Member
Join Date: Jul 2002
Location: Redskin Park, VA
Posts: 1,116
Likes: 0
Received 0 Likes
on
0 Posts
Re: Okays heres the low down on more information on the MENG header from US. (b18bturbo)
These manifolds are nice, Viren knows what he is talking about I have the same ones.
09-27-2002, 04:33 PM
#6
Honda-Tech Member
Join Date: Jan 2002
Location: Prescott Arizona
Posts: 4,426
Likes: 0
Received 0 Likes
on
0 Posts
Re: Okays heres the low down on more information on the MENG header from US. (kidkutz)
Not that it matters any more but who actually makes the manifold?
Rob
Rob
Trending Topics
09-27-2002, 11:56 PM
#8
Join Date: Jun 2002
Location: PORN CAPITAL OF THE WORLD, Ca, usa
Posts: 3,599
Likes: 0
Received 0 Likes
on
0 Posts
Re: Okays heres the low down on more information on the MENG header from US. (roby)
Thread
Thread Starter
Forum
Replies
Last Post
b19coupe
All Motor / Naturally Aspirated
81
09-12-2005 02:25 AM
