Ok.. getting turbo put on.. Need opinions on setup (newbie)
#1
Thread Starter
Join Date: Feb 2002
Location: Tulsa, OK, USA
Posts: 57
Likes: 0
Received 0 Likes
on
0 Posts
Ok.. getting turbo put on.. Need opinions on setup (newbie)
I have a 99 Civic Si, stock internals for the moment:
Turbonetics T3/T04e .58 trim
RevHard Manifold
Tial WG
Godzilla BOV
Spearco I/C
HOndata 3b
550cc injectors
Walbro 195lph pump
The guy doing the install is recommending 10 psi daily on this setup. I know that the stock internals will bite the dust eventually, so I'm already trying to line up an LS block to get sleeved. I thought this was kinda high for a daily driver/weekend racer setup.. Any opinions on how long the stock intenals will last?
Thanks in advance
Turbonetics T3/T04e .58 trim
RevHard Manifold
Tial WG
Godzilla BOV
Spearco I/C
HOndata 3b
550cc injectors
Walbro 195lph pump
The guy doing the install is recommending 10 psi daily on this setup. I know that the stock internals will bite the dust eventually, so I'm already trying to line up an LS block to get sleeved. I thought this was kinda high for a daily driver/weekend racer setup.. Any opinions on how long the stock intenals will last?
Thanks in advance
#2
Re: Ok.. getting turbo put on.. Need opinions on setup (BlackOutSi)
What's wrong with 7 or 8 psi? Should be plenty fast.
Or are you trying to beat that red RX7 with the hidden nos again?
J/K
Or are you trying to beat that red RX7 with the hidden nos again?
J/K
#3
Re: Ok.. getting turbo put on.. Need opinions on setup (BlackOutSi)
7-8 psi should be fast enough for ya for now. Enjoy 7-8 psi first, then when you get bored of it or get bitting by the speed bug like most of us then go higher boost. Offcourse higher boost= more money! Lots of it!
#5
Honda-Tech Member
Join Date: Jan 2000
Location: Northern, CA, USA
Posts: 1,119
Likes: 0
Received 0 Likes
on
0 Posts
Re: Ok.. getting turbo put on.. Need opinions on setup (b18bturbo)
Get the 255lph pump. It is only like $10 more, and you really shouldnt skimp on fuel components.
#6
Thread Starter
Join Date: Feb 2002
Location: Tulsa, OK, USA
Posts: 57
Likes: 0
Received 0 Likes
on
0 Posts
Re: Ok.. getting turbo put on.. Need opinions on setup (Strng1dah)
Thanks for the input guys... any estimated HP numbers at 6-8 psi? The guy tuning it is very competent, and suprises me everytime I talk to him.. He's doing this all for around $4k, installed and dyno tuned!!
In fact, he's building his 800hp DSM right now as well.. runs 31psi and 100 shot
In fact, he's building his 800hp DSM right now as well.. runs 31psi and 100 shot
Trending Topics
Thread
Thread Starter
Forum
Replies
Last Post