Oil squirters for B18b( How, where, NEED HELP
10-26-2002, 12:33 PM
#1
Thread Starter
Join Date: Oct 2002
Location: Denver, CO, U.S
Posts: 55
Likes: 0
Received 0 Likes
on
0 Posts
Oil squirters for B18b( How, where, NEED HELP
I'm Currently rebuilding my turbo B18b and I really want to put oil squirters in because I want to make it as eficient & reliable as possable,and i've used the machineist before he's nationaly reconized but his exp. goes more to V8's
but he wanted to do the work so i let him.
My question is can it be done,if so how hard,where can i find them and how much.
but he wanted to do the work so i let him.
My question is can it be done,if so how hard,where can i find them and how much.
10-26-2002, 09:36 PM
#2
Honda-Tech Member
Re: Oil squirters for B18b( How, where, NEED HELP (iceman 99)
Squirters not necessary with forged pistons. Spend your $ for more important things. We pull them and plug them in our b18c race motors. Some builders just pinch them shut.
10-27-2002, 06:41 PM
#3
Honda-Tech Member
Join Date: Dec 2001
Location: NW, FL
Posts: 1,170
Likes: 0
Received 0 Likes
on
0 Posts
Re: Oil squirters for B18b( How, where, NEED HELP (iceman 99)
Oil squirters = piston coolers (not lubricators)
I agree with earl, since forged gets rid of heat faster than casted pistons.
But, if you plan on a lot of circuit racing (being in high revs for more than a 1/4 mile), then it might be a good idea to have them.
I agree with earl, since forged gets rid of heat faster than casted pistons.
But, if you plan on a lot of circuit racing (being in high revs for more than a 1/4 mile), then it might be a good idea to have them.
Thread
Thread Starter
Forum
Replies
Last Post
