oil lines to the turbo & oil pressure gauge..... Do I need to bleed them first?
#1
Honda-Tech Member
Thread Starter
Join Date: Mar 2003
Location: Bay Area, CA
Posts: 3,183
Likes: 0
Received 0 Likes
on
0 Posts
oil lines to the turbo & oil pressure gauge..... Do I need to bleed them first?
I'm thinking the line to the turbo will not need to be bleeded since there is a return line to cycle the oil, but for the oil pressure gauge on the dash... Will I need to bleed this line before screwing in the gauge? My guage didnt come with instructions.
Nick
Nick
#3
Honda-Tech Member
iTrader: (1)
Join Date: Mar 2003
Location: I drink Seafoam and poo into catch cans, USA
Posts: 3,215
Likes: 0
Received 2 Likes
on
2 Posts
Re: oil lines to the turbo & oil pressure gauge..... Do I need to bleed them first? (m3bluegsr)
just connect them. No need to prime.
I like to hold the oil feed in a bottle during startup to make sure oil DOES actually come through it, and also so it gets out any crap that MIGHT have been inside the line.
Then, shut off car and connect to turbo.
I like to hold the oil feed in a bottle during startup to make sure oil DOES actually come through it, and also so it gets out any crap that MIGHT have been inside the line.
Then, shut off car and connect to turbo.
#4
Honda-Tech Member
Thread Starter
Join Date: Mar 2003
Location: Bay Area, CA
Posts: 3,183
Likes: 0
Received 0 Likes
on
0 Posts
Re: oil lines to the turbo & oil pressure gauge..... Do I need to bleed them first? (mike1114)
cool ****, so no need to prime or bleed. Roger
Thread
Thread Starter
Forum
Replies
Last Post