Oil in Intake manifold, near BOV
#1
Honda-Tech Member
Thread Starter
Join Date: Dec 2004
Location: San Luis Obispo, CA, USA
Posts: 20
Likes: 0
Received 0 Likes
on
0 Posts
Oil in Intake manifold, near BOV
What could be the cause of this excess oil in the intake manifold charge piping and the bov?
Relevent info:
B16 9.1CP Pistons/Eagle Rods
Hondata s300
Max boost 20psi ~366whp
Precision Billet 5557
Skunk2 Intake Manifold w/hondata gasket
2.5in charge piping
BOV is within 16" of intake manifold
Setup has less than 8000 miles on it
Stock block ventilation no catch can < this is the only thing I can think of
Am fairly new to turbo setups can someone please offer some feedback on my set up?
Relevent info:
B16 9.1CP Pistons/Eagle Rods
Hondata s300
Max boost 20psi ~366whp
Precision Billet 5557
Skunk2 Intake Manifold w/hondata gasket
2.5in charge piping
BOV is within 16" of intake manifold
Setup has less than 8000 miles on it
Stock block ventilation no catch can < this is the only thing I can think of
Am fairly new to turbo setups can someone please offer some feedback on my set up?
#2
Honda-Tech Member
iTrader: (4)
Join Date: Apr 2005
Location: South, Texas
Posts: 12,903
Likes: 0
Received 0 Likes
on
0 Posts
Re: Oil in Intake manifold, near BOV
Not enough crankcase ventilation for starters. Check you turbo drain line that it's large enough and as straight as possible wih no 90 degree bends for proper draining and then from there think about an oil restrictor. Pull the charge pipe off compressor to see how much oil your dealing with
Thread
Thread Starter
Forum
Replies
Last Post
Cashmoney061596
Honda Civic / Del Sol (1992 - 2000)
3
08-10-2013 01:01 PM