OEM B16/B18 vs OEM B20 Headgasket
07-05-2009, 10:19 AM
#1
Honda-Tech Member
Thread Starter
Join Date: Jan 2004
Location: Norway, Norway
Posts: 178
Likes: 0
Received 0 Likes
on
0 Posts
OEM B16/B18 vs OEM B20 Headgasket
Im building a turboed engine for my EG civic, 400-500 whp goal. SC61 and Neukin manifold. Built engine.
I have a 84mm Benson B18C, and need a headgasket. Is the stock OEM B20 gasket as good as the OEM B16/B18 gasket? Or should I just go for the bored OEM gaskets made by Golden Eagle ??
I have a 84mm Benson B18C, and need a headgasket. Is the stock OEM B20 gasket as good as the OEM B16/B18 gasket? Or should I just go for the bored OEM gaskets made by Golden Eagle ??
07-05-2009, 01:42 PM
#2
official honda whore
Join Date: Nov 2002
Location: not tellin you where, pa, usa
Posts: 8,454
Likes: 0
Received 0 Likes
on
0 Posts
Re: OEM B16/B18 vs OEM B20 Headgasket
there was a topic on this last week, if you have a vtec bottom end (b18c) then you need a vtec gasket bored out to whatever your bore is, i found the cheapest was ben@ import parts for the GE gasket
Thread
Thread Starter
Forum
Replies
Last Post
New Rex 220 151
All Motor / Naturally Aspirated
13
11-19-2012 05:55 PM
yellowturbo
Forced Induction
4
01-16-2004 04:47 AM
