O/T Oil pres. gauge on a SR20DET
10-14-2003, 10:56 PM
#1
Thread Starter
Join Date: Oct 2002
Location: Iraq,AQ
Posts: 1,177
Likes: 0
Received 0 Likes
on
0 Posts
O/T Oil pres. gauge on a SR20DET
I have a buddy with an SR20DET and were looking for a source on the block for oil pressure,so far nothing. does anyone one kno where to look ? I've looked near the oil filter and traced back from the Oil feed and no luck. any ideas ?
this forum has been really good to respond to F/I question. Thats why i'm postin here maybe someone might have experience
TIA
this forum has been really good to respond to F/I question. Thats why i'm postin here maybe someone might have experience
TIA
10-14-2003, 11:36 PM
#2
Honda-Tech Member
Join Date: Oct 2000
Location: DFW, TX, USA
Posts: 157
Likes: 0
Received 0 Likes
on
0 Posts
Re: O/T Oil pres. gauge on a SR20DET (Bspec18)
The best place to tap for oil pressure on the DET is at the factory oil pressure sending unit location. This is below the intake manifold on the block. The best way to do it is with one of these http://www.nissport.com/catalo...Type=
10-14-2003, 11:47 PM
#3
Member
Join Date: Jun 2002
Location: Hot Hot Heat, AZ
Posts: 1,148
Likes: 0
Received 0 Likes
on
0 Posts
Re: O/T Oil pres. gauge on a SR20DET (Bspec18)
FWD or RWD DET? this might help, i have a FWD DE block with DET head.....the oil pressure sending unit is in this area
Thread
Thread Starter
Forum
Replies
Last Post
aleks77
Forced Induction
8
06-08-2007 05:46 AM
yusoslo
Forced Induction
25
04-02-2004 11:47 AM
