Are the new T3/GT40's Ball bearing?
11-20-2005, 04:14 AM
#1
Thread Starter
Join Date: Jun 2002
Posts: 426
Likes: 0
Received 0 Likes
on
0 Posts
Are the new T3/GT40's Ball bearing?
I was wondering if the t3/GT40 http://store.yahoo.com/cheapturbo/t3b.html come ball bearing? Are these the same as the t3/t67's? Also anyone running these turbos got any feedback? I deciding on either this turbo. the t3/t67's and the GT35R.
11-20-2005, 07:05 AM
#2
Honda-Tech Member
Join Date: Jun 2001
Location: San Antonio, TurboElements, TX, USA
Posts: 1,240
Likes: 0
Received 0 Likes
on
0 Posts
The "T3/GT40" is the same as the "T3/T61" or "Blowzilla" it is a smaller turbo then the T3/T67 which is also known as "The Big Kahuna" or the "T3/TO4R".
And no they don't come standard in BB but they can be upgraded to the New BB CHRA.
And no they don't come standard in BB but they can be upgraded to the New BB CHRA.
11-20-2005, 07:17 AM
#3
B*A*N*N*E*D
Join Date: Sep 2002
Posts: 2,661
Likes: 0
Received 0 Likes
on
0 Posts
Re: (TurboElements.com)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by TurboElements.com »</TD></TR><TR><TD CLASS="quote">The "T3/GT40" is the same as the "T3/T61" or "Blowzilla" it is a smaller turbo then the T3/T67 which is also known as "The Big Kahuna" or the "T3/TO4R".
And no they don't come standard in BB but they can be upgraded to the New BB CHRA.</TD></TR></TABLE>
we offer them in a ballbearing or non-ballbearing form.
i've been testing the new BBT3/To4R w/ a T3p .63 a/r on a 2.0L EVO and am seeing 22psi at 5k rpms, with 12psi recovery between shifts. 
(401awhp on 91 octane)
just put swaped that one for the stg3 turbine wheel, for a back to back and am now able to acheive 22psi at 4k, with a steady pull to redline.
feel free to PM with any questions
Ken
And no they don't come standard in BB but they can be upgraded to the New BB CHRA.</TD></TR></TABLE>
we offer them in a ballbearing or non-ballbearing form.i've been testing the new BBT3/To4R w/ a T3p .63 a/r on a 2.0L EVO and am seeing 22psi at 5k rpms, with 12psi recovery between shifts.
(401awhp on 91 octane)just put swaped that one for the stg3 turbine wheel, for a back to back and am now able to acheive 22psi at 4k, with a steady pull to redline.
feel free to PM with any questions
Ken
11-20-2005, 11:42 AM
#5
Honda-Tech Member
Re: (tony1)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by tony1 »</TD></TR><TR><TD CLASS="quote">How much power did it loose going down to the stage 3 turbine wheel?</TD></TR></TABLE>
Interested in this as well.
Interested in this as well.
Thread
Thread Starter
Forum
Replies
Last Post
kidkutz
Forced Induction
1
10-06-2002 01:12 PM
