New dyno graph for my A/W Civic...
#1
New User
Thread Starter
Join Date: Oct 2001
Location: Memphis, Tennessee, USA
Posts: 3,077
Likes: 0
Received 0 Likes
on
0 Posts
New dyno graph for my A/W Civic...
Car made the 150 mile trip fine, but drivability and gas milage were very bad. Got about 15 MPG on the interstate, and the car ran better when the CEL was on because of the missing o2 sensor from not having a bung in the incomplete (AND LOUUUUD) open downpipe.
Got there at about noon, we went and got lunch, and got started on the car once it had cooled off some. I yanked the crossmember and dropped the downpipe. Don and Dustin worked on getting it completed, with o2 bungs for wideband and the stock o2, and it looks mahvelous. I'll have to pull it off and take pictures when it's time to get it ceramic coated. Once the exhaust was sealed back up and quiet, it was time to put her on the dyno to see what she'd do.
We tuned drivability for about 2 hours, and it's 125% better than it was before. It drive almost like a normal civic street car with an agressive clutch, though. It's nice. It stumbles a few times in parking lot situations, but Don explained mostly how to get these fixed. It's just a super rich or lean field that I should be able to see in the fuel map.
Next we moved on to the fun stuff. MAKING POWER.
We started off at the wastegate's spring pressure (.4 bar/7ish psi) and worked up from there. The tuning was bad in these fields as well. Don put some not too agressive timing in the car, and it was running good. At 7 PSI, the car put down 206 HP/140 TQ at the wheels in a 90 degree dyno bay.
Stepped it up to .7 bar, about 10 PSI, and we started to notice a problem. We weren't getting a very good intake air temp because the intercooler just wasn't cutting it with the increased airflow. I think the best numbers we got at 10 PSI were something around the mid 230's.
We went back and set the car up to about .95 bar, 14 psi, and started playing with it, since this would be the highest tune we'd make on pump gas. After adding a bunch of fuel over the base tune I had, he was able to get the car to put down 264hp/193tq, but the IAT's were steadily climbing from the inadequite aftercooling.
Thanks a million, Don, Dustin, and everyone at Polk Performance in Bryant, Arkansas. I'll be coming back for a midsize PTE FMIC install probably next spring.
Got there at about noon, we went and got lunch, and got started on the car once it had cooled off some. I yanked the crossmember and dropped the downpipe. Don and Dustin worked on getting it completed, with o2 bungs for wideband and the stock o2, and it looks mahvelous. I'll have to pull it off and take pictures when it's time to get it ceramic coated. Once the exhaust was sealed back up and quiet, it was time to put her on the dyno to see what she'd do.
We tuned drivability for about 2 hours, and it's 125% better than it was before. It drive almost like a normal civic street car with an agressive clutch, though. It's nice. It stumbles a few times in parking lot situations, but Don explained mostly how to get these fixed. It's just a super rich or lean field that I should be able to see in the fuel map.
Next we moved on to the fun stuff. MAKING POWER.
We started off at the wastegate's spring pressure (.4 bar/7ish psi) and worked up from there. The tuning was bad in these fields as well. Don put some not too agressive timing in the car, and it was running good. At 7 PSI, the car put down 206 HP/140 TQ at the wheels in a 90 degree dyno bay.
Stepped it up to .7 bar, about 10 PSI, and we started to notice a problem. We weren't getting a very good intake air temp because the intercooler just wasn't cutting it with the increased airflow. I think the best numbers we got at 10 PSI were something around the mid 230's.
We went back and set the car up to about .95 bar, 14 psi, and started playing with it, since this would be the highest tune we'd make on pump gas. After adding a bunch of fuel over the base tune I had, he was able to get the car to put down 264hp/193tq, but the IAT's were steadily climbing from the inadequite aftercooling.
Thanks a million, Don, Dustin, and everyone at Polk Performance in Bryant, Arkansas. I'll be coming back for a midsize PTE FMIC install probably next spring.
#4
Honda-Tech Member
Join Date: Feb 2003
Location: Decatur, AL
Posts: 1,472
Likes: 0
Received 0 Likes
on
0 Posts
Re: New dyno graph for my A/W Civic... (Vtec92Civic)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by Vtec92Civic »</TD></TR><TR><TD CLASS="quote">mos def . . . that's crazy a awd civic I want one too </TD></TR></TABLE>
?????? AWD ???????
????? CIVIC ??????
Whos got the drugs ova here??
?????? AWD ???????
????? CIVIC ??????
Whos got the drugs ova here??
#6
Honda-Tech Member
Join Date: Oct 2001
Location: Pembroke Pines, Florida, United States
Posts: 6,024
Likes: 0
Received 0 Likes
on
0 Posts
Re: New dyno graph for my A/W Civic... (Vtec92Civic)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by Vtec92Civic »</TD></TR><TR><TD CLASS="quote">mos def . . . that's crazy a awd civic I want one too </TD></TR></TABLE>
A/W = Air-to-Water i'm assuming since he had an a/w i/c in his setup hehe
A/W = Air-to-Water i'm assuming since he had an a/w i/c in his setup hehe
#7
New User
Thread Starter
Join Date: Oct 2001
Location: Memphis, Tennessee, USA
Posts: 3,077
Likes: 0
Received 0 Likes
on
0 Posts
Re: New dyno graph for my A/W Civic... (CivicRyda2k)
Yeah, the air-water intercooling system is up for sale...
https://honda-tech.com/zerothread?id=873082
Lots of pics and information there.
https://honda-tech.com/zerothread?id=873082
Lots of pics and information there.
Trending Topics
#8
sh!t happens.
Join Date: Apr 2003
Location: greenVILLE, SC
Posts: 7,734
Likes: 0
Received 0 Likes
on
0 Posts
Re: New dyno graph for my A/W Civic... (CivicRyda2k)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by CivicRyda2k »</TD></TR><TR><TD CLASS="quote">
A/W = Air-to-Water i'm assuming since he had an a/w i/c in his setup hehe</TD></TR></TABLE>
i agree with him^^^^^^^^^^^
A/W = Air-to-Water i'm assuming since he had an a/w i/c in his setup hehe</TD></TR></TABLE>
i agree with him^^^^^^^^^^^
#10
New User
Thread Starter
Join Date: Oct 2001
Location: Memphis, Tennessee, USA
Posts: 3,077
Likes: 0
Received 0 Likes
on
0 Posts
Re: New dyno graph for my A/W Civic... (HybridHatch88)
Yeah, I think it has a great amount of potential in my car... jsut need to get a bigger intercooler.
Thread
Thread Starter
Forum
Replies
Last Post
null.
Tech / Misc
5
02-27-2005 09:21 PM
SiR Kid
Honda CRX / EF Civic (1988 - 1991)
6
05-23-2004 05:33 AM