Turbocivic94

what ar should I use on exhaust and intake. I would like to get SC61 but I have t3/t4e with 48 ar now and I want to change it. I'm sending the turbo out so Its my chance to get whatever ar's I want. Thanx in advance
my setup:
Sleeved B18a Block 9:8:1
Built B16a Head
JG intake manifold
equal length turbo manifold
35mm HP Tial wastegate
PWR intercooler
Hondata 3b

tygsr

sc61 will support alot more than 450whp..

paulzy

iTrader: (1)

you should be fine with they turbo you have now if the compressor side is a 54 trim or larger with an E cover...go with a .63 turbine housing,that's like a universal size

PM-Performance

if you want ill sell you my 63, im swapping out for an 82

Turbocivic94

unfortunately, my turbo is on the way to turbo-performance. any other opinions

fed integ

thanks for your turbo.....yours should be back next month

shermanyang

iTrader: (1)

a t3/t04e with my specs should be able to handle about 500 hp. .63 turbine, .60 compressor, .57 trim.

Turbocivic94

no problem bro, hopefully I can get t3/60-1

ID_ten_T

what injectors do you plan on running to get to 450hp?

Turbocivic94

720cc