need help with greddy profec 2 controller
09-21-2003, 03:38 PM
#1
Thread Starter
Join Date: Sep 2002
Location: flushing, ny, 11355
Posts: 145
Likes: 0
Received 0 Likes
on
0 Posts
need help with greddy profec 2 controller
i tried to raise the boost up like around 18-20%. now the car WONT even boost. did something just happen ? how do i reset the damn controller ? is it even that ?
im new to the whole turbo scene so someone help me out
im new to the whole turbo scene so someone help me out
09-21-2003, 04:03 PM
#2
Thread Starter
Join Date: Sep 2002
Location: flushing, ny, 11355
Posts: 145
Likes: 0
Received 0 Likes
on
0 Posts
Re: need help with greddy profec 2 controller (etmoron)
i removed the whole boost controller setup. and put back on the stock turbo hose on the wastegate and turbo. drove it around . still no boost. i get 0.1 psi . what the hell just happen the my turbo ?
bump bump bump
bump bump bump
09-21-2003, 05:22 PM
#3
Honda-Tech Member
Join Date: Oct 2001
Location: nor cal
Posts: 2,011
Likes: 0
Received 0 Likes
on
0 Posts
Re: need help with greddy profec 2 controller (etmoron)
BOOST LEAK.. i had the same exact problem... check your couplings and your piping... if that's not it then read below...
go here for instructions on how to make a tester.. I did and i found a couple leaks already..
https://honda-tech.com/zerothread?id=462282
go here for instructions on how to make a tester.. I did and i found a couple leaks already..
https://honda-tech.com/zerothread?id=462282
Thread
Thread Starter
Forum
Replies
Last Post
Tinh Ngo
Classifieds: Forced Induction
4
03-20-2007 07:27 PM
Tinh Ngo
Northern California (Sales)
25
02-23-2007 05:13 PM
og asr
Forced Induction
5
11-23-2005 08:52 PM