Need help getting rebuilt motor up and running.
#1
Thread Starter
Join Date: Mar 2003
Location: Yorktown, VA, USA
Posts: 423
Likes: 0
Received 0 Likes
on
0 Posts
Need help getting rebuilt motor up and running.
I just finished rebuilding my motor. CP 81.5mm 9.1 pistons, Full-race rods, GE sleeves, EF-1 valvesprings and retainers, Supertech valves. I have most of the turbo stuff together, but am waiting on a couple of parts. I was told to run it all motor(I kinda have to since I am missing a couple of turbo things) until I break it in for 1000 miles. Right now I have RC 550 saturated injectors and Hondata 4b. Should I put my stock injectors in along wih the stock ECU back in? Is there anything special I have to do when i start it up? Thanks.
#2
Honda-Tech Member
Join Date: Jan 2002
Location: motor city, mi
Posts: 398
Likes: 0
Received 0 Likes
on
0 Posts
Re: Need help getting rebuilt motor up and running. (ITR9788)
I would run the stock ecu and injectors to break it in nicely, it should run like stock. Before I started mine up I took off the injector wires and plug wires. then I let the starter run for 3 sets of 10 second cranks. I was hoping that the oil pump would prime and have oil at startup
Thread
Thread Starter
Forum
Replies
Last Post