Need help deciding what rods and pistons to use for turbo
#1
Honda-Tech Member
Thread Starter
Join Date: Oct 2004
Location: edmonds, wa, usa
Posts: 148
Likes: 0
Received 0 Likes
on
0 Posts
Need help deciding what rods and pistons to use for turbo
i just picked up a b16 block and now im building it to turbo it, but i dont wanna use the stock PR3's that are in it. I found some ls rods and pistons for cheap but will they work in a b16? or am i better gettin some JE rods and pistons or some other brand? Also what size do u think would be the best to get me good low compression...also if any1 is sellin anything let me know.
#2
Honda-Tech Member
Join Date: Nov 2004
Location: Spinning, FL, USA
Posts: 2,460
Likes: 0
Received 0 Likes
on
0 Posts
Eagle rods go for around 300$ shipped and Pistons can vary from 450-500 new with rings and all
For pistons, there all the same, Weisco, JE, CP all good in my book.
For pistons, there all the same, Weisco, JE, CP all good in my book.
#3
Member
Join Date: Sep 2004
Location: louisiana, USA
Posts: 1,258
Likes: 0
Received 0 Likes
on
0 Posts
Re: (Sick00SiCoupe)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by Sick00SiCoupe »</TD></TR><TR><TD CLASS="quote">Eagle rods go for around 300$ shipped and Pistons can vary from 450-500 new with rings and all
For pistons, there all the same, Weisco, JE, CP all good in my book.</TD></TR></TABLE>
Yeah eagle rods are cheap and they have been proven to withold good amounts of power. Crower rods are also very good but a little more expensive. I prefer CP pistons because they "are the most accurate" pistons (to like .0001 or something). Correct me if i am wrong on that guys.
For pistons, there all the same, Weisco, JE, CP all good in my book.</TD></TR></TABLE>
Yeah eagle rods are cheap and they have been proven to withold good amounts of power. Crower rods are also very good but a little more expensive. I prefer CP pistons because they "are the most accurate" pistons (to like .0001 or something). Correct me if i am wrong on that guys.
Thread
Thread Starter
Forum
Replies
Last Post