Need advice for a cat-back on a JRSC'd teg
#1
Junior Member
Thread Starter
Join Date: Dec 2001
Location: calgary, alberta, Canada
Posts: 91
Likes: 0
Received 0 Likes
on
0 Posts
Need advice for a cat-back on a JRSC'd teg
Right now I have a 3" Thermal R&D exhaust and it is just too loud. I'm thinking of going down to a 2.5" exhaust but I'm not sure which one to get. What would be a good (and quiet) one to get.
Thanks
Thanks
#2
Honda-Tech Member
Join Date: Aug 2002
Location: M Trizzle
Posts: 2,456
Likes: 0
Received 0 Likes
on
0 Posts
Re: Need advice for a cat-back on a JRSC'd teg (proton)
maybe you can get a greddy evo... kinda small though, but not nearly as loud as the thermal... and btw... i know this is off topic.. but how do you like your clutchmasters stage 3 clutch?.. im deciding on clutches right now and your opinion would be great.. thank
#3
Junior Member
Thread Starter
Join Date: Dec 2001
Location: calgary, alberta, Canada
Posts: 91
Likes: 0
Received 0 Likes
on
0 Posts
Re: Need advice for a cat-back on a JRSC'd teg (G_Force_Si)
My clutchmasters stage 3 is good. I have no complaints. It feels pretty much stock except it grips much better. I don't have much to compare it to though because I have never had another clutch other than the OEM Honda one.
Which one do you guys think would be the quietest?
-Apex-i N1
-Tanabe (I don't know which one)
-Greddy Evo
Thanks.
Which one do you guys think would be the quietest?
-Apex-i N1
-Tanabe (I don't know which one)
-Greddy Evo
Thanks.
#4
Honda-Tech Member
Join Date: Apr 2002
Location: Huntington Beach, CA, USA
Posts: 839
Likes: 0
Received 0 Likes
on
0 Posts
Re: Need advice for a cat-back on a JRSC'd teg (proton)
i love my clutchmasters 3too!
how about custom manderal bent piping with a es oval muffler?
how about custom manderal bent piping with a es oval muffler?
#5
Honda-Tech Member
Join Date: Apr 2002
Location: Knoxville, TN, U.S.
Posts: 360
Likes: 0
Received 0 Likes
on
0 Posts
Re: Need advice for a cat-back on a JRSC'd teg (proton)
I'm running the same setup as you right now:
JRSC GSR @ 9psi
DC 4-1 JDM Header (2.5" collector)
3" Test pipe
Thermal 3" Catback
Water Injection
Map Mod
Comptech Intake/Ice Box
I'm going to sell my Thermal and buy a Greddy Power Extreme. One of my good friends had it on his car and it sounds really good and it's also about 2.5" piping.
BTW: He had the same setup as I do on my car before it got stolen.
What kind of #'s are you putting down with that setup?
How much more power did you get out of your car when you put the Hondata on there? Just curious, I'll be going to a Hondata S200 very soon.
Thanks.
JRSC GSR @ 9psi
DC 4-1 JDM Header (2.5" collector)
3" Test pipe
Thermal 3" Catback
Water Injection
Map Mod
Comptech Intake/Ice Box
I'm going to sell my Thermal and buy a Greddy Power Extreme. One of my good friends had it on his car and it sounds really good and it's also about 2.5" piping.
BTW: He had the same setup as I do on my car before it got stolen.
What kind of #'s are you putting down with that setup?
How much more power did you get out of your car when you put the Hondata on there? Just curious, I'll be going to a Hondata S200 very soon.
Thanks.
#6
Join Date: Jun 2002
Location: FT. Lauderdale, Florida, USA
Posts: 1,086
Likes: 0
Received 0 Likes
on
0 Posts
Re: Need advice for a cat-back on a JRSC'd teg (speedy108)
All of the exhausts suggested you WILL lose power........why not just weld in a big 3" resonator to quiet it down alot. do a search people on here sell them for a good price.
#7
Junior Member
Thread Starter
Join Date: Dec 2001
Location: calgary, alberta, Canada
Posts: 91
Likes: 0
Received 0 Likes
on
0 Posts
Re: Need advice for a cat-back on a JRSC'd teg (BEe18SeAONe)
I dynoed at 206whp.
I've already put on 2 foot long resonators in an attempt to quiet it down in addition to a 3" high-flow cat. I still find it too loud.
I know a guy that is willing to trade his Greddy Evo for my Thermal and another that might be willing to trade his Apex-i N1. Which one do you guys think would be quieter?
Thanks again
I've already put on 2 foot long resonators in an attempt to quiet it down in addition to a 3" high-flow cat. I still find it too loud.
I know a guy that is willing to trade his Greddy Evo for my Thermal and another that might be willing to trade his Apex-i N1. Which one do you guys think would be quieter?
Thanks again
Trending Topics
#10
Junior Member
Thread Starter
Join Date: Dec 2001
Location: calgary, alberta, Canada
Posts: 91
Likes: 0
Received 0 Likes
on
0 Posts
Re: Need advice for a cat-back on a JRSC'd teg (mighty goku)
Yeah the numbers seem a bit low but I'm at an elevation of 3000ft and it was on a Mustang dyno, if that makes any difference. It doesn't really matter to me though, dynos are for tuning.
So no one has any experience with an Apex-i N1 or a Tanabe exhaust on a JRSC'd honda?
So no one has any experience with an Apex-i N1 or a Tanabe exhaust on a JRSC'd honda?
#11
Re: Need advice for a cat-back on a JRSC'd teg (proton)
Tanabe super hyper medallion- (oval, straight through, all stainless, quiet)
DC TCS- (twin straight through silencers, all stainless) Does anybody know about the sound and the level from the DC TCS?
I have a thermal too, and I'm tired of the loudness. I feel like people think I want to race when I come off the line! I can't rev without being watched! AHHHHH!
I want the "Silent but deadly" (with a nice low tone)...
I want the Mugen TL, too much for just the rear section...
I will personally go with the Super Hyper Medallion or TCS.
DC TCS- (twin straight through silencers, all stainless) Does anybody know about the sound and the level from the DC TCS?
I have a thermal too, and I'm tired of the loudness. I feel like people think I want to race when I come off the line! I can't rev without being watched! AHHHHH!
I want the "Silent but deadly" (with a nice low tone)...
I want the Mugen TL, too much for just the rear section...
I will personally go with the Super Hyper Medallion or TCS.
#13
Re: Need advice for a cat-back on a JRSC'd teg (proton)
yeah i had the tanabe on my JRSC gs-r and it was way too loud for me
i just got the apex N1 and it's nice and quiet till i hit V-tec then it gets loud but
is OK do to the fact i don't hit V-tec all the time
i just got the apex N1 and it's nice and quiet till i hit V-tec then it gets loud but
is OK do to the fact i don't hit V-tec all the time
#16
Honda-Tech Member
Join Date: Nov 2002
Location: Botswana
Posts: 3,365
Likes: 0
Received 0 Likes
on
0 Posts
Re: Need advice for a cat-back on a JRSC'd teg (KingDsi)
Does anybody know about the sound and the level from the DC TCS?
Thread
Thread Starter
Forum
Replies
Last Post