Need advice with building a motor with a stage 2 turbo
02-27-2006, 02:54 PM
#1
Junior Member
Thread Starter
Join Date: Apr 2005
Location: manchester, nh, 03110
Posts: 37
Likes: 0
Received 0 Likes
on
0 Posts
Need advice with building a motor with a stage 2 turbo
ok i could ask you guys how to build a motor but i am taking baby steps with all of this.. i am building a 90 acura integra with a turbo setup i already have.. i want to be able to safely run it at 16+ psi all the time.. so i am going to sleeve the motor.. but i am not sure what kind to get.. i found a set of darton sleeves a while back that seemed really good... but i am not sure.. i want qualitly but not meaning the most expensive... any help would be nice...
02-27-2006, 03:03 PM
#2
Re: Need advice with building a motor with a stage 2 turbo (acuraocd)
I think that all the major sleeve manufacturers are really good.The most important part is WHO is installing them ?The little local guys rarely have enough experience to know what to do and what not to do.I would contact earl on here or golden eagle or even maybe z10 but expect to pay at least 800 bucks for the sleeves and installation
02-27-2006, 05:25 PM
#3
Junior Member
Thread Starter
Join Date: Apr 2005
Location: manchester, nh, 03110
Posts: 37
Likes: 0
Received 0 Likes
on
0 Posts
Re: Need advice with building a motor with a stage 2 turbo (siblues)
are those the names of places that will sleeve it or names of sleeves... i am looking at some dartons right on ebay and some other site.. they say they go for about 500-570 shipped...
Thread
Thread Starter
Forum
Replies
Last Post
jetspeedz
Forced Induction
32
05-15-2013 11:26 AM
blackedoutcivic
Hybrid / Engine Swaps
18
06-05-2003 10:35 PM