My turbo dilemma! (need help)
#1
Honda-Tech Member
Thread Starter
Join Date: Aug 2001
Location: www.js-garage.com
Posts: 6,470
Likes: 0
Received 0 Likes
on
0 Posts
My turbo dilemma! (need help)
Ok Here is what i need done.
---Install Full race turbo kit (has to have bumper support cut, and turbo bolted on)
---Install Thermal 3" rd + test pipe (needs to have a test pipe fabed)
---Install Defi D guages + guage pods (just basic wires ran, need professional look though)
---Install Tilton Clutch + flywheel (im not sure if its like installing normal clutch, has to be adjusted)
---Install AEM and Fuel system (needs to be dynoed tuned)
---Has to be able to put bottom end on later (built block coming)
--- TUNED TUNED TUNED
Now my request, I will travel 500 miles from where i live. If i travel i will need a place to stay (hotel room is fine). This is my daily driver so the install/tuning cant take longer then 7 days (one week). I would also like to help out, I can install 90 percent of it myself, i just dont have the tools and would rather have a "professional" do it. I want everything to look correct, and work correctly, not half *** problems.
Who can help me out? I will pay the person/shop. I just want it done correctly, and i want to be treated like a person, im tired of getting the run around.
Thanks alot,
Jordo
Jordo5185@hotmail.com is my email.
---Install Full race turbo kit (has to have bumper support cut, and turbo bolted on)
---Install Thermal 3" rd + test pipe (needs to have a test pipe fabed)
---Install Defi D guages + guage pods (just basic wires ran, need professional look though)
---Install Tilton Clutch + flywheel (im not sure if its like installing normal clutch, has to be adjusted)
---Install AEM and Fuel system (needs to be dynoed tuned)
---Has to be able to put bottom end on later (built block coming)
--- TUNED TUNED TUNED
Now my request, I will travel 500 miles from where i live. If i travel i will need a place to stay (hotel room is fine). This is my daily driver so the install/tuning cant take longer then 7 days (one week). I would also like to help out, I can install 90 percent of it myself, i just dont have the tools and would rather have a "professional" do it. I want everything to look correct, and work correctly, not half *** problems.
Who can help me out? I will pay the person/shop. I just want it done correctly, and i want to be treated like a person, im tired of getting the run around.
Thanks alot,
Jordo
Jordo5185@hotmail.com is my email.
#4
Honda-Tech Member
Join Date: Nov 2001
Location: KOP, PA, USA
Posts: 2,685
Likes: 0
Received 0 Likes
on
0 Posts
Re: (T-RO)
**** Jordo. Fly ITR206 and I down there. We'll install it and tune that bitch in a weekend and have enough time to hit up bourbon street y0!
Whoops didnt see you have AEM EMS. THat is the debil!
Whoops didnt see you have AEM EMS. THat is the debil!
#7
Honda-Tech Member
Thread Starter
Join Date: Aug 2001
Location: www.js-garage.com
Posts: 6,470
Likes: 0
Received 0 Likes
on
0 Posts
Re: (DC2R714)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by DC2R714 »</TD></TR><TR><TD CLASS="quote">**** Jordo. Fly ITR206 and I down there. We'll install it and tune that bitch in a weekend and have enough time to hit up bourbon street y0!
Whoops didnt see you have AEM EMS. THat is the debil!</TD></TR></TABLE>
I can get whatever standalone, is needed. to whoever can tune..
Whoops didnt see you have AEM EMS. THat is the debil!</TD></TR></TABLE>
I can get whatever standalone, is needed. to whoever can tune..
Trending Topics
#8
Honda-Tech Member
Re: (Jordo)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by Jordo »</TD></TR><TR><TD CLASS="quote">
I can get whatever standalone, is needed. to whoever can tune.. </TD></TR></TABLE>
if ya want to drive up here to PA, we will help you out with no problems
I can get whatever standalone, is needed. to whoever can tune.. </TD></TR></TABLE>
if ya want to drive up here to PA, we will help you out with no problems
#9
Honda-Tech Member
Thread Starter
Join Date: Aug 2001
Location: www.js-garage.com
Posts: 6,470
Likes: 0
Received 0 Likes
on
0 Posts
Re: (Dturbocivic)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by Dturbocivic »</TD></TR><TR><TD CLASS="quote">
if ya want to drive up here to PA, we will help you out with no problems </TD></TR></TABLE>
its about 20 hours, but hell i might just do it. make a vacation out of it..
if ya want to drive up here to PA, we will help you out with no problems </TD></TR></TABLE>
its about 20 hours, but hell i might just do it. make a vacation out of it..
#11
Honda-Tech Member
Thread Starter
Join Date: Aug 2001
Location: www.js-garage.com
Posts: 6,470
Likes: 0
Received 0 Likes
on
0 Posts
Re: (limeaccord)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by limeaccord »</TD></TR><TR><TD CLASS="quote">drive down to Houston.</TD></TR></TABLE>
whos in houston that will help?
whos in houston that will help?
#12
Honda-Tech Member
Join Date: May 2003
Location: Bone Broke, TX
Posts: 1,092
Likes: 0
Received 0 Likes
on
0 Posts
Re: (Jordo)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by Jordo »</TD></TR><TR><TD CLASS="quote">
whos in houston that will help? </TD></TR></TABLE>
well st00pid can tune just about anything, and i assume that he has a shop. can't remember his site.....
whos in houston that will help? </TD></TR></TABLE>
well st00pid can tune just about anything, and i assume that he has a shop. can't remember his site.....
#13
Honda-Tech Member
Thread Starter
Join Date: Aug 2001
Location: www.js-garage.com
Posts: 6,470
Likes: 0
Received 0 Likes
on
0 Posts
Re: (limeaccord)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by limeaccord »</TD></TR><TR><TD CLASS="quote">
well st00pid can tune just about anything, and i assume that he has a shop. can't remember his site.....</TD></TR></TABLE>
yeah, im trying to contact him still.
well st00pid can tune just about anything, and i assume that he has a shop. can't remember his site.....</TD></TR></TABLE>
yeah, im trying to contact him still.
#14
Guest
Posts: n/a
Re: (Jordo)
i know you say you don't have the tools etc...but i honestly would invest the money your gonna pay someone to do it into some nice tools and do it yourself... Im sure there are quite a few people willing to help on here anytime you run into a problem, etc. just take your time and you will be fine. If your having a hard time finding someone now whats gonna happen when something goes wrong and you need something fixed asap?
#15
Honda-Tech Member
Re: My turbo dilemma! (Jordo)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by Jordo »</TD></TR><TR><TD CLASS="quote">Ok Here is what i need done.
---Install Full race turbo kit (has to have bumper support cut, and turbo bolted on)
---Install Thermal 3" rd + test pipe (needs to have a test pipe fabed)
---Install Defi D guages + guage pods (just basic wires ran, need professional look though)
---Install Tilton Clutch + flywheel (im not sure if its like installing normal clutch, has to be adjusted)
---Install AEM and Fuel system (needs to be dynoed tuned)
---Has to be able to put bottom end on later (built block coming)
--- TUNED TUNED TUNED
Now my request, I will travel 500 miles from where i live. If i travel i will need a place to stay (hotel room is fine). This is my daily driver so the install/tuning cant take longer then 7 days (one week). I would also like to help out, I can install 90 percent of it myself, i just dont have the tools and would rather have a "professional" do it. I want everything to look correct, and work correctly, not half *** problems.
Who can help me out? I will pay the person/shop. I just want it done correctly, and i want to be treated like a person, im tired of getting the run around.
Thanks alot,
Jordo
Jordo5185@hotmail.com is my email. </TD></TR></TABLE>
Wow. I wish I had the paitence of you. There is no way I could have all that just sitting there waiting to be put on the car. Although I'm the kinda person that likes to do everything myself tho.
---Install Full race turbo kit (has to have bumper support cut, and turbo bolted on)
---Install Thermal 3" rd + test pipe (needs to have a test pipe fabed)
---Install Defi D guages + guage pods (just basic wires ran, need professional look though)
---Install Tilton Clutch + flywheel (im not sure if its like installing normal clutch, has to be adjusted)
---Install AEM and Fuel system (needs to be dynoed tuned)
---Has to be able to put bottom end on later (built block coming)
--- TUNED TUNED TUNED
Now my request, I will travel 500 miles from where i live. If i travel i will need a place to stay (hotel room is fine). This is my daily driver so the install/tuning cant take longer then 7 days (one week). I would also like to help out, I can install 90 percent of it myself, i just dont have the tools and would rather have a "professional" do it. I want everything to look correct, and work correctly, not half *** problems.
Who can help me out? I will pay the person/shop. I just want it done correctly, and i want to be treated like a person, im tired of getting the run around.
Thanks alot,
Jordo
Jordo5185@hotmail.com is my email. </TD></TR></TABLE>
Wow. I wish I had the paitence of you. There is no way I could have all that just sitting there waiting to be put on the car. Although I'm the kinda person that likes to do everything myself tho.
#16
Join Date: Mar 2004
Location: Tierra, del Fuego, Argentina
Posts: 32
Likes: 0
Received 0 Likes
on
0 Posts
Re: My turbo dilemma! (Jordo)
Have you tried calling Jody or Tom @ Lightning MotorSports in Baton Rouge for their feedback to your installation questions? ...OR...Perhaps Vic at Fisher's could tell you who might be of some assistance.
What city do you live in?
What city do you live in?
#17
Honda-Tech Member
Thread Starter
Join Date: Aug 2001
Location: www.js-garage.com
Posts: 6,470
Likes: 0
Received 0 Likes
on
0 Posts
Re: My turbo dilemma! (CaseTested)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by CaseTested »</TD></TR><TR><TD CLASS="quote">Have you tried calling Jody or Tom @ Lightning MotorSports in Baton Rouge for their feedback to your installation questions? ...OR...Perhaps Vic at Fisher's could tell you who might be of some assistance.
What city do you live in?
</TD></TR></TABLE>
i dont think lightning does installs....
now fishers charges crazy amounts...
What city do you live in?
</TD></TR></TABLE>
i dont think lightning does installs....
now fishers charges crazy amounts...
#20
Member
Join Date: Mar 2002
Location: Dallas Sewers, Usa
Posts: 6,018
Likes: 0
Received 0 Likes
on
0 Posts
Re: My turbo dilemma! (tthame1)
Jordo
Friends of mine Arturbo and Direp972(Im sure you know them) do occasional Turbo installs, ect..... on the side. I have space and tools at my house, so If they wanted to do all the work here that would be fine. Tony1 is now available to tune as well, he still works for Norwood(Down the street), but hes doing tuning on the side on the weekends anywhere as long as you pay for dyno time. He recently tuned 3 local friends here who have a hookup on dyno time so that was cheap. Of course it was hondata, but you said you were up for anything.
**** if everything worked out, you could work out a deal With Art, Have Tony tune it, and well your more than happy to stay at my place. My roomate has a Mustang(which doesnt fit in the garage) so you would even have your own garage parking space .
If your interested let me know, Art and Tony are both reasonable on pricing and well they are both more than reputable. And me well if you stay here, you can stay for free as long as you buy me some beer to last the weekend
We are all in Dallas too, not sure where you live i Lousianna, but Im sure its less than 500 miles.
Modified by quikB18B at 12:47 PM 4/6/2004
Modified by quikB18B at 12:50 PM 4/6/2004
Friends of mine Arturbo and Direp972(Im sure you know them) do occasional Turbo installs, ect..... on the side. I have space and tools at my house, so If they wanted to do all the work here that would be fine. Tony1 is now available to tune as well, he still works for Norwood(Down the street), but hes doing tuning on the side on the weekends anywhere as long as you pay for dyno time. He recently tuned 3 local friends here who have a hookup on dyno time so that was cheap. Of course it was hondata, but you said you were up for anything.
**** if everything worked out, you could work out a deal With Art, Have Tony tune it, and well your more than happy to stay at my place. My roomate has a Mustang(which doesnt fit in the garage) so you would even have your own garage parking space .
If your interested let me know, Art and Tony are both reasonable on pricing and well they are both more than reputable. And me well if you stay here, you can stay for free as long as you buy me some beer to last the weekend
We are all in Dallas too, not sure where you live i Lousianna, but Im sure its less than 500 miles.
Modified by quikB18B at 12:47 PM 4/6/2004
Modified by quikB18B at 12:50 PM 4/6/2004
#21
Honda-Tech Member
Join Date: Jan 2003
Location: A Place in, Florida, USA
Posts: 7,277
Likes: 0
Received 0 Likes
on
0 Posts
Re: My turbo dilemma! (Jordo)
My offer is still open Jordo (never got back to you as I had to get going). You got a place to stay if you come down here. Just call (727) 571-1450 and John, Scott, Matt or Kyle will take care of you.
#22
Honda-Tech Member
Thread Starter
Join Date: Aug 2001
Location: www.js-garage.com
Posts: 6,470
Likes: 0
Received 0 Likes
on
0 Posts
Re: My turbo dilemma! (tthame1)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by tthame1 »</TD></TR><TR><TD CLASS="quote">What about Street Driven?</TD></TR></TABLE>
Street Driven told me they were to busy.
Street Driven told me they were to busy.
Thread
Thread Starter
Forum
Replies
Last Post