espanol

so i blew up my sc61 and the best guy in the turbo world,arturbo, hand delivered me the golden child's knife, aka:gt3r.with the blown sc61 i was making 412 whp on 14.5 psi. i slapped on the gt35r and with no changes to the map i made 427 whp. it spools a whole hell of a lot faster and the power feels much better.of course the guys at vsv performance didn't stop at 427 or 14.5 psi.the numbers are secret for now to me and the few that have rode in the silver surfer integra.for once it feels quick.no race gas yet has been induced and all numbers that have been withheld have been produced on pump gas....so when you're getting your *** handed to you on the street just make sure to remember when i go big with race gas i will be taking names.j/k...thanks also to my friend stan @ fast-turbo.com for hooking it up on some fittings.buy your **** now from him!!vsv kicks *** and so does stoney who is my tuner and also my friend.skid-mark kicks *** and we have a turbo four door that will kick your ***.peace and suck it.i'm going to disneyworld...over and out bitches.

p.s.to all the boys and girls that bought me the t.v....you guys rule..love ya always, espanol

b18cx

I'll still run ya. Not even a hint of the numbers??

wHOAlly

no numbers, but can u give us a list of motor specs? or atleast basics...bore, displacemnt, cr?

B18bEK

congratulations espanol on the wedding today have fun in disney world and i'll be waiting at your doorstep for my ride in the silver surfer integra when you get back

ATS*Mark

ill run ya

sounds awsome i wanna see the numbers now!

calib17a

Please, more details on setup, c/r, displacement, motor, etc. I'll waiting to slap on my GT35R on a built 2 lit ls/vtec. Exactly how is the response, what rpm does it start spooling? Give us a play by play to redline through the gears! Was it tuned on 93 octane and what was the torque? Nice numbers !

nevin

stunna

macrosshn

iTrader: (1)

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by espanol &raquo;</TD></TR><TR><TD CLASS="quote">so i blew up my sc61 and the best guy in the turbo world,arturbo, hand delivered me the golden child's knife, aka:gt3r.with the blown sc61 i was making 412 whp on 14.5 psi. i slapped on the gt35r and with no changes to the map i made 427 whp. it spools a whole hell of a lot faster and the power feels much better.of course the guys at vsv performance didn't stop at 427 or 14.5 psi.the numbers are secret for now to me and the few that have rode in the silver surfer integra.for once it feels quick.no race gas yet has been induced and all numbers that have been withheld have been produced on pump gas....so when you're getting your *** handed to you on the street just make sure to remember when i go big with race gas i will be taking names.j/k...thanks also to my friend stan @ fast-turbo.com for hooking it up on some fittings.buy your **** now from him!!vsv kicks *** and so does stoney who is my tuner and also my friend.skid-mark kicks *** and we have a turbo four door that will kick your ***.peace and suck it.i'm going to disneyworld...over and out bitches.

p.s.to all the boys and girls that bought me the t.v....you guys rule..love ya always, espanol </TD></TR></TABLE>

listen to this guy......427 hp later and he says 'it finally feels fast.'

numba1

thats pretty awesome numbers! Anyone wnat to buy my sc61? I want a gt35r Too!!!!!!!!!!!!!Don't have no time slips but beat a R1,from a roll on in 2nd gear(20mph) up to 115mph, and was up a car and a fender,fully built gsr (not stock bore) redline 9500 rpm's, full interior with some misc. junk laying around,and yeah i'll run the silversurfer and the four door. peace, beeeeeyatch

alpha

Very nice. At what RPM did you see 14.5lbs of boost?

B18bEK

espanol just got married and is now on his honeymoon. and 4U2NV owes Lucas $10

tommyten

awwh, he looks so cute

MEAOW!


thats the perfect pic to photochop with!!!

DIRep972

iTrader: (1)

lol. Nice job felix & stoney.

Got his GT35R, made 427whp+, got married, and went to disney world all in the same weekend. must be nice!

Andrea

Hearing this makes me that much more excited to get the gt28rs on my d-series

DD_JonnyLee

i see a vast amount of sc61's for sell in the classified in the near future...starting with mine nice numbers by the way

macrosshn

iTrader: (1)

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by Raped-Ape &raquo;</TD></TR><TR><TD CLASS="quote">i see a vast amount of sc61's for sell in the classified in the near future...starting with mine nice numbers by the way</TD></TR></TABLE>

So has the sc61 bandwagon broken a wheel? I'm one step ahead, GT30r baby!

DIRep972

iTrader: (1)

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by macrosshn &raquo;</TD></TR><TR><TD CLASS="quote">

So has the sc61 bandwagon broken a wheel? I'm one step ahead, GT30r baby! </TD></TR></TABLE>

I think he means people will be stepping ahead to GT35R's.. Its always been better then the SC61 just too BALLER-bearing for most.

macrosshn

iTrader: (1)

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by DIRep972 &raquo;</TD></TR><TR><TD CLASS="quote">

I think he means people will be stepping ahead to GT35R's.. Its always been better then the SC61 just too BALLER-bearing for most. </TD></TR></TABLE>

True true. I had to get my Gt30r second hand and even then it was a pretty penny.

alpha

Not until the prices come down a little. Which I don't see happening.

jmal1919

just curious as to how the GT35R compares to the GT3561?

DIRep972

iTrader: (1)

Well he has the precision GT35r (uses the T3 5 bolt turbine housing) so it is identical to a GT3561 w/ a t04s housing minus the baller-bearing. Power should be really, close, and spool would be slightly slower.

jmal1919

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by DIRep972 &raquo;</TD></TR><TR><TD CLASS="quote">Well he has the precision GT35r (uses the T3 5 bolt turbine housing) so it is identical to a GT3561 w/ a t04s housing minus the baller-bearing. Power should be really, close, and spool would be slightly slower.</TD></TR></TABLE>

nice. seems like I made the right choice

B18bEK

he actually made more than 427hp and the flight to disney world was late he had to deboard the plane and put a b-series tranny on it b/c the reverse wasn't working right

quikB18B

Damn congrats Felix, were just all glad that your happy, just keep this one a while

B18bEK

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by quikB18B &raquo;</TD></TR><TR><TD CLASS="quote">just keep this one a while </TD></TR></TABLE>
the wife or the integra?