My new block!!! w/ New Darton Design
#1
Honda-Tech Member
Thread Starter
Join Date: Jul 2002
Location: Dallas, Tx, USA
Posts: 1,860
Likes: 0
Received 0 Likes
on
0 Posts
My new block!!! w/ New Darton Design
Hey all just got home and snapped some pics of my new block I picked up today.
As some of you know I cracked a sleeve and was about to replace with my extra stock B18B but I decided to do this
Al I need was a new piston b/c the old one was scratched on the side really bad, and new bearings yada yada.
This is Darton's brand new design they came out with, I was one of the licky firsts to get them.
Anyways to the good stuff!
[Modified by foozball-26, 11:03 PM 3/28/2003]
As some of you know I cracked a sleeve and was about to replace with my extra stock B18B but I decided to do this
Al I need was a new piston b/c the old one was scratched on the side really bad, and new bearings yada yada.
This is Darton's brand new design they came out with, I was one of the licky firsts to get them.
Anyways to the good stuff!
[Modified by foozball-26, 11:03 PM 3/28/2003]
#2
Re: My new block!!! w/ New Darton Design (foozball-26)
That's Darton's new design and they also have one more o-ring towards the bottom of the sleeve, this was changed due to the AEBS Patent on the sleeves and there were some legal issues. This is from a very very reputable Race/Machine shop that deals with Darton and was told directlt to them, great either way AEBS or Darton, if I were to do it all over again one of those would've been my choice. Good luck with your block and set up.
#3
Re: My new block!!! w/ New Darton Design (Boostfed)
If you got that from Jotech I am pretty sure that is a RS machined block with the raised sleeve. That is the closed deck raised 3 thousanths.
art
art
#4
Re: My new block!!! w/ New Darton Design (Arturbo)
Looks good. Would a closed deck like the AEBS or old Darton help with headgasket sealing compared to that design, RS's, or GEM's?
#5
Honda-Tech Member
Thread Starter
Join Date: Jul 2002
Location: Dallas, Tx, USA
Posts: 1,860
Likes: 0
Received 0 Likes
on
0 Posts
Re: My new block!!! w/ New Darton Design (hybrid901)
no, I didnt get this from jotech, I WAS going to buy a Golden Eagle block from them. But I had to order a new piston so I figure mind as well get the better sleeves while im at it. Especially when they would have cost the same amount.
[Modified by foozball-26, 12:55 AM 3/29/2003]
[Modified by foozball-26, 12:55 AM 3/29/2003]
Trending Topics
#12
Honda-Tech Member
Thread Starter
Join Date: Jul 2002
Location: Dallas, Tx, USA
Posts: 1,860
Likes: 0
Received 0 Likes
on
0 Posts
Re: My new block!!! w/ New Darton Design (HybridcivicLS-T)
Yea good to have it, It was built locally by Stoid Racing. The sleeves cost me $530 and the install was $400
Thread
Thread Starter
Forum
Replies
Last Post
FastAllmotorLsVtec
All Motor / Naturally Aspirated
11
07-19-2004 04:10 PM