my new 1/4 mile times
05-24-2003, 09:41 AM
#1
Member
Thread Starter
Join Date: Dec 2000
Location: official euro R hospital, AUSTRIA
Posts: 4,567
Likes: 0
Received 0 Likes
on
0 Posts
my new 1/4 mile times
12.85 @ 119mph
I tried first time my BFG DRAG radials with 1.4 Bar and water burn out box. I am happy with the result. We don't have measured the other stuff like 60 feet and 1/8 Mile.
dialed in boost with AVC-R
1st gear) 0.5 Bar
2nd gear) 0.8 Bar
3rd & 4th) 1.2 Bar
I tried first time my BFG DRAG radials with 1.4 Bar and water burn out box. I am happy with the result. We don't have measured the other stuff like 60 feet and 1/8 Mile.
dialed in boost with AVC-R
1st gear) 0.5 Bar
2nd gear) 0.8 Bar
3rd & 4th) 1.2 Bar
05-24-2003, 09:46 AM
#2
Honda-Tech Member
Join Date: Oct 2000
Location: Dallas/Miami, FL, USA
Posts: 11,155
Likes: 0
Received 0 Likes
on
0 Posts
Re: my new 1/4 mile times (austrian type-R)
damn christian you are getting freaking quick you must be the fastest european board member...
you making at least 450 hp with that trap speed
you making at least 450 hp with that trap speed
05-24-2003, 10:08 AM
#4
Member
Thread Starter
Join Date: Dec 2000
Location: official euro R hospital, AUSTRIA
Posts: 4,567
Likes: 0
Received 0 Likes
on
0 Posts
Re: my new 1/4 mile times (nekkedR)
Well, better as the street tires. But it was my first time, so there is room for improving the starts.
225/50/50
street tire: 225/45/16
225/50/50
street tire: 225/45/16
05-24-2003, 01:38 PM
#7
Honda-Tech Member
Re: my new 1/4 mile times (pissedoffsol)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by pissedoffsol »</TD></TR><TR><TD CLASS="quote"> 
traction is always a problem </TD></TR></TABLE>
Are you sure about that?
traction is always a problem </TD></TR></TABLE>Are you sure about that?
Trending Topics
05-24-2003, 04:50 PM
#8
I am a bad person
Re: my new 1/4 mile times (Bryson)
Great Times 
Traction is always an issue especially on drag radials. I went 12.4@127 on my old setup with 1 pass at 19psi all the way down the track. that was with a .82 rear housing so it helped tire spin. My new setup i got 1 pass at 18 psi and thought i had an 11 in the bag since I finished in 3rd gear. I ran 12.8@128. After that i just went to slicks. i do want to get back to the track on radials though and get it dialed in with the innovative gear based controller.
Traction is always an issue especially on drag radials. I went 12.4@127 on my old setup with 1 pass at 19psi all the way down the track. that was with a .82 rear housing so it helped tire spin. My new setup i got 1 pass at 18 psi and thought i had an 11 in the bag since I finished in 3rd gear. I ran 12.8@128. After that i just went to slicks. i do want to get back to the track on radials though and get it dialed in with the innovative gear based controller.
05-24-2003, 08:09 PM
#13
Honda-Tech Member
Re: my new 1/4 mile times (MotorMatrix.com)
Yes I know, but I don't think it's "always" going to be an issue. Maybe I'm looking at this statment from a different persepective.
I'll just shut up.
I'll just shut up.
Thread
Thread Starter
Forum
Replies
Last Post