my motor is finally finished!!!!
#1
Junior Member
Thread Starter
Join Date: Nov 2002
Location: baltimore, maryland, u.s.
Posts: 626
Likes: 0
Received 0 Likes
on
0 Posts
my motor is finally finished!!!!
well after several months of waiting and waiting and saving money and spending money and spending more money my motor is finally finished and ready to go in the car, once again i know the pics suck because of the camera phone, my previous post was a pic of just the block, heres the pics of the finished motor and the specs again, b18a bored out to 2.0L with endyn 84.5mm pistons, golden eagle sleeved, eagle h-beam rods, blueprint, balance , 5 angle valve job on ls head, skunk 2 intake manifold and cam gears, walbro pump, aem fuel rail with 750cc msd injectors, on hondata s200b with max rev turbo kit, all going in my 92 integra, let me know what you guys think, im a stoked billycat to have this dropped in my car in a week and a half, all work done by je import performance........
Modified by gstintegra92 at 10:32 PM 10/22/2003
Modified by gstintegra92 at 10:32 PM 10/22/2003
#4
Honda-Tech Member
Join Date: Apr 2003
Location: Chester, MD
Posts: 1,711
Likes: 0
Received 0 Likes
on
0 Posts
Re: my motor is finally finished!!!! (2.2Lcivic)
SSSUUUUWWWEEEETTT!! let us know how it turns out! I want dyno and track numbers! hehe have fun with it man. It sounds like it took a lot of time and money to figure out what you want and I am sure you will be pleased with it.
#5
Honda-Tech Member
Join Date: Dec 2002
Location: AZ
Posts: 1,222
Likes: 0
Received 0 Likes
on
0 Posts
Re: my motor is finally finished!!!! (Redlineracer)
Thats what i'm starting to do, I alredy have the sleeved 2L block and it will be either a turbo LS or possibly a LSvtec N/A. In a perfect world I would like a Full-Race kit with Hondata and Crower rods and Wiesco pistons but that is going to take a long time so we will see. At least the block I have has a closed/vented deck and its o-ringed so it can take it. Good job with the motor.
Trending Topics
#9
Junior Member
Thread Starter
Join Date: Nov 2002
Location: baltimore, maryland, u.s.
Posts: 626
Likes: 0
Received 0 Likes
on
0 Posts
Re: my motor is finally finished!!!! (BADEG6)
haha dan ur real funny, ur gonna need better plans then that for that eg if you think ur gonna keep up, comin from someone who is drivin his mommys taurus!!! haha thanks for comments everyone i cant wait.
Modified by gstintegra92 at 11:55 AM 10/23/2003
Modified by gstintegra92 at 11:55 AM 10/23/2003
#10
Junior Member
Thread Starter
Join Date: Nov 2002
Location: baltimore, maryland, u.s.
Posts: 626
Likes: 0
Received 0 Likes
on
0 Posts
Re: my motor is finally finished!!!! (gstintegra92)
ill have a dyno chart posted up sometime towards the end of this month of november.............mike
#13
Member
Join Date: Oct 2002
Location: Secret Tweaker Pad
Posts: 3,279
Likes: 0
Received 0 Likes
on
0 Posts
Re: my motor is finally finished!!!! (gstintegra92)
Hey gstintegra92, nice setup. I tried PM'ing you with some questions about the shop you got it done at but they were disabled it says.
#14
Junior Member
Thread Starter
Join Date: Nov 2002
Location: baltimore, maryland, u.s.
Posts: 626
Likes: 0
Received 0 Likes
on
0 Posts
Re: my motor is finally finished!!!! (lazerus)
haha yea i got a ghetto *** valve cover to put on there, so i had him leave it off for the pics haha.......
#16
Junior Member
Thread Starter
Join Date: Nov 2002
Location: baltimore, maryland, u.s.
Posts: 626
Likes: 0
Received 0 Likes
on
0 Posts
Re: my motor is finally finished!!!! (TeStUdO)
just pmed you back, you can im me on aol im as well, its the same as my honda tech name...........gstintegra92
#17
Re: my motor is finally finished!!!! (Unsung EM1)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by Unsung EM1 »</TD></TR><TR><TD CLASS="quote">Badass </TD></TR></TABLE>
Thread
Thread Starter
Forum
Replies
Last Post
Flexin5
Acura Integra
15
09-20-2006 03:50 PM