My fully built K24 547whp/452tq 93 octane
02-28-2009, 12:05 PM
#1
Honda-Tech Member
Thread Starter
Join Date: Feb 2006
Location: albany, NY
Posts: 327
Likes: 0
Received 0 Likes
on
0 Posts
My fully built K24 547whp/452tq 93 octane
Trending Topics
02-28-2009, 07:37 PM
#8
Junior Member
Join Date: Mar 2007
Location: Kansas City, going back to Cali
Posts: 58
Likes: 0
Received 0 Likes
on
0 Posts
03-01-2009, 03:36 PM
#10
Honda-Tech Member
Thread Starter
Join Date: Feb 2006
Location: albany, NY
Posts: 327
Likes: 0
Received 0 Likes
on
0 Posts
Re: My fully built K24 547whp/452tq 93 octane
K24a4 w/k20a2 head
GT4088 twin scroll
dual wastegate
3" exhaust and IC piping
89mm sleeved
pauter rods
cp pistons
he heavily detuned it after that to be safe ended up making like 505whp afterwards
GT4088 twin scroll
dual wastegate
3" exhaust and IC piping
89mm sleeved
pauter rods
cp pistons
he heavily detuned it after that to be safe ended up making like 505whp afterwards
03-01-2009, 03:43 PM
#11
Honda-Tech Member
Join Date: Oct 2004
Posts: 2,907
Likes: 0
Received 0 Likes
on
0 Posts
Re: My fully built K24 547whp/452tq 93 octane
any idea what the timing was at 17psi?
id like to know what it made almost 550 at..
sick #'s though, i plan on doing the same setup almost
id like to know what it made almost 550 at..
sick #'s though, i plan on doing the same setup almost
03-01-2009, 05:10 PM
#12
Honda-Tech Member
03-02-2009, 12:49 AM
#14
Honda-Tech Member
Join Date: Sep 2006
Location: Falling Waters, WV/Hagerstown, MD
Posts: 932
Likes: 0
Received 0 Likes
on
0 Posts
03-02-2009, 01:13 AM
#15
Honda-Tech Member
Join Date: Sep 2007
Location: Vancouver, WA, USA
Posts: 2,628
Likes: 0
Received 0 Likes
on
0 Posts
Re: My fully built K24 547whp/452tq 93 octane
it was at least 3rd gear if you listen close you can hear him shift twice. usually with that much power on the dyno itll spin in third. mine did with only 350 wheel ha.
good numbers none the less,
good numbers none the less,
03-02-2009, 06:49 AM
#16
Honda-Tech Member
Thread Starter
Join Date: Feb 2006
Location: albany, NY
Posts: 327
Likes: 0
Received 0 Likes
on
0 Posts
Re: My fully built K24 547whp/452tq 93 octane
no clue about timing, i know he had to back it off big time after that run tho....was in 3rd gear with drag radials, 4th gear put down 4 whp less i believe
RS machine did the sleeving, great job too, sleeves are very thick ill see if i can dig up some pics i took while i was building the engine....
will deffinetly post race gas numbers as i am very anxious to get it done lol
RS machine did the sleeving, great job too, sleeves are very thick ill see if i can dig up some pics i took while i was building the engine....
will deffinetly post race gas numbers as i am very anxious to get it done lol
03-02-2009, 06:50 AM
#17
Honda-Tech Member
Thread Starter
Join Date: Feb 2006
Location: albany, NY
Posts: 327
Likes: 0
Received 0 Likes
on
0 Posts
Re: My fully built K24 547whp/452tq 93 octane
oh and btw.....6 speed transmission
broke my 5 speed
PPG bullhead 1-4 straight cuts are on their way!
broke my 5 speed
PPG bullhead 1-4 straight cuts are on their way!
Thread
Thread Starter
Forum
Replies
Last Post
