My Full-Race GT3582R CRX
#1
Honda-Tech Member
Thread Starter
Join Date: Mar 2007
Location: Modesto, CA, United States
Posts: 454
Likes: 0
Received 0 Likes
on
0 Posts
My Full-Race GT3582R CRX
Enjoy!!!
[http://aycu15.webshots.com/ima...s.jpg
http://aycu23.webshots.com/ima...s.jpg
Modified by mighty137 at 8:23 PM 8/3/2007
[http://aycu15.webshots.com/ima...s.jpg
http://aycu23.webshots.com/ima...s.jpg
Modified by mighty137 at 8:23 PM 8/3/2007
#5
Honda-Tech Member
Thread Starter
Join Date: Mar 2007
Location: Modesto, CA, United States
Posts: 454
Likes: 0
Received 0 Likes
on
0 Posts
Engine specs are very similar to most H/T members.....
LS-V with 81.5 crower rods, cp's and on stock sleeves....tuned with hondata s200 with boost.
Superrtech valve springs,retainers, stock 00si head.
Nothing fancy, but it gets her moving just fine.
LS-V with 81.5 crower rods, cp's and on stock sleeves....tuned with hondata s200 with boost.
Superrtech valve springs,retainers, stock 00si head.
Nothing fancy, but it gets her moving just fine.
Trending Topics
#10
Honda-Tech Member
Join Date: Jul 2004
Location: I'm everywhere Focker
Posts: 5,463
Likes: 0
Received 2 Likes
on
2 Posts
Re: (herecomesboost)
No, mesh sucks man. I think if he'd have cut his bumper support the mount would look cleaner. It just looks a little stuffed in there as it is. As long as it hauls though, is all that truly matters....lol.
#11
Honda-Tech Member
iTrader: (1)
Join Date: Feb 2005
Location: NoVa
Posts: 4,849
Likes: 0
Received 0 Likes
on
0 Posts
Re: (RC000E)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by RC000E »</TD></TR><TR><TD CLASS="quote"> As long as it hauls though, is all that truly matters....lol.</TD></TR></TABLE>
#13
Re: (spets)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by spets »</TD></TR><TR><TD CLASS="quote">I think a mesh or a grill over the intercooler would make it look better.
But a very nicely done engine bay, and good numbers. </TD></TR></TABLE>
Actually it would make it look like ****....looks clean as is. As stated though, maybe cutting the bumper support would make her fit a little more snug, but nonetheless
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by slow poke »</TD></TR><TR><TD CLASS="quote">You should probably add something technical to this post. This is not AC.</TD></TR></TABLE>
No...but its forced induction....and badass at that
But a very nicely done engine bay, and good numbers. </TD></TR></TABLE>
Actually it would make it look like ****....looks clean as is. As stated though, maybe cutting the bumper support would make her fit a little more snug, but nonetheless
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by slow poke »</TD></TR><TR><TD CLASS="quote">You should probably add something technical to this post. This is not AC.</TD></TR></TABLE>
No...but its forced induction....and badass at that
Thread
Thread Starter
Forum
Replies
Last Post