my FI pic thread. almost finished with my project
#1
Honda-Tech Member
Thread Starter
Join Date: Dec 2001
Location: Filthadelphia Area, PA, USA
Posts: 1,568
Likes: 0
Received 0 Likes
on
0 Posts
my FI pic thread. almost finished with my project
tell me what you think.
The car: 88 CRX Si, first gen b16, hondata 4b, max rev turbo mani, t3/t4oe .63 a/r stage 3 wheel 57 trim running .45 bar, tial 35mm, spearco air/water intercooler, the list goes on just like everybody else's.
I took the car out to an abandonded airport last night loaded the water reserviour with ice and let the car warm up. Then took a couple of blasts down the runway. All I can say is wow. Sooooooo fun. Now i just need to get all of the glass installed so i can keep my eyes open next time
polished manifold and turbo. That piece of grey rubber held on with zip ties is not a coupler its just there to keep the pipe from rubbing my radiator till i can find a better pipe.
nice big cooler and fan for the intercooler. I have another fan on the other side of the radiator for primary cooling purposes and this fan is just for the cooler. After all this is going to be my daily driver and i gotta keep those Intake air temps down.
i hope my girl doesn't mind keeping her feet on either side of my water reserviour
Thanks to b18bturbo for the deal on the intercooler, Arturbo for the size recomendation for the turbo, sgt for the hondata tune that i'm running, 93lsivic for getting me motivated by giving me a ride in his car and everyone else that gave advice along the way. I would have never made it this far without honda-tech
EDIT: I forgot to thank slowass4door for the turbo group buy and brian b for the max rev mani. anyway, thanks.
[Modified by racerxadam, 9:48 PM 1/17/2003]
The car: 88 CRX Si, first gen b16, hondata 4b, max rev turbo mani, t3/t4oe .63 a/r stage 3 wheel 57 trim running .45 bar, tial 35mm, spearco air/water intercooler, the list goes on just like everybody else's.
I took the car out to an abandonded airport last night loaded the water reserviour with ice and let the car warm up. Then took a couple of blasts down the runway. All I can say is wow. Sooooooo fun. Now i just need to get all of the glass installed so i can keep my eyes open next time
polished manifold and turbo. That piece of grey rubber held on with zip ties is not a coupler its just there to keep the pipe from rubbing my radiator till i can find a better pipe.
nice big cooler and fan for the intercooler. I have another fan on the other side of the radiator for primary cooling purposes and this fan is just for the cooler. After all this is going to be my daily driver and i gotta keep those Intake air temps down.
i hope my girl doesn't mind keeping her feet on either side of my water reserviour
Thanks to b18bturbo for the deal on the intercooler, Arturbo for the size recomendation for the turbo, sgt for the hondata tune that i'm running, 93lsivic for getting me motivated by giving me a ride in his car and everyone else that gave advice along the way. I would have never made it this far without honda-tech
EDIT: I forgot to thank slowass4door for the turbo group buy and brian b for the max rev mani. anyway, thanks.
[Modified by racerxadam, 9:48 PM 1/17/2003]
#2
Honda-Tech Member
Join Date: Apr 2001
Location: YYZ - DXB
Posts: 2,092
Likes: 0
Received 0 Likes
on
0 Posts
Re: my FI pic thread. almost finished with my project (racerxadam)
All I can say is wow. Sooooooo fun. Now i just need to get all of the glass installed so i can keep my eyes open next time
#3
Re: my FI pic thread. almost finished with my project (racerxadam)
nice setup...one question
when does the turbo start spooling and when do you get full boost? I have a b16 too and was looking at getting the same trim turbo...thanks
when does the turbo start spooling and when do you get full boost? I have a b16 too and was looking at getting the same trim turbo...thanks
#4
Honda-Tech Member
Re: my FI pic thread. almost finished with my project (racerxadam)
Holy **** Adam@! Finally man, looks great. So why didnt you give me a call for the debut run?? I know that the car has to be fast---way faster than mine! Damn, were gonna hang out this weekend, I'll call you tomorrow!
Again, congrats!!!!! I WANNA RIDE NOW!!
Again, congrats!!!!! I WANNA RIDE NOW!!
#5
Honda-Tech Member
Thread Starter
Join Date: Dec 2001
Location: Filthadelphia Area, PA, USA
Posts: 1,568
Likes: 0
Received 0 Likes
on
0 Posts
Re: my FI pic thread. almost finished with my project (BlueSi2k)
nice setup...one question
when does the turbo start spooling and when do you get full boost? I have a b16 too and was looking at getting the same trim turbo...thanks
when does the turbo start spooling and when do you get full boost? I have a b16 too and was looking at getting the same trim turbo...thanks
#6
Honda-Tech Member
Thread Starter
Join Date: Dec 2001
Location: Filthadelphia Area, PA, USA
Posts: 1,568
Likes: 0
Received 0 Likes
on
0 Posts
Re: my FI pic thread. almost finished with my project (93LSivic)
Holy **** Adam@! Finally man, looks great. So why didnt you give me a call for the debut run?? I know that the car has to be fast---way faster than mine! Damn, were gonna hang out this weekend, I'll call you tomorrow!
Again, congrats!!!!! I WANNA RIDE NOW!!
Again, congrats!!!!! I WANNA RIDE NOW!!
Trending Topics
#12
Honda-Tech Member
Thread Starter
Join Date: Dec 2001
Location: Filthadelphia Area, PA, USA
Posts: 1,568
Likes: 0
Received 0 Likes
on
0 Posts
Re: my FI pic thread. almost finished with my project
I've been thinking and i don't think my thread title fits 'cause this car will probably always be changing and never finished. Just a whole to throw money at
#13
Honda-Tech Member
Join Date: Jan 2002
Location: Prescott Arizona
Posts: 4,426
Likes: 0
Received 0 Likes
on
0 Posts
Re: my FI pic thread. almost finished with my project (racerxadam)
Thats a really nice looking setup, if yo dont mind what did you pay for your air to water intercooler? thanks
Rob
Rob
#14
Honda-Tech Member
Thread Starter
Join Date: Dec 2001
Location: Filthadelphia Area, PA, USA
Posts: 1,568
Likes: 0
Received 0 Likes
on
0 Posts
Re: my FI pic thread. almost finished with my project (rjardy)
Thats a really nice looking setup, if yo dont mind what did you pay for your air to water intercooler? thanks
Rob
Rob
Thread
Thread Starter
Forum
Replies
Last Post