my dyno on my 90 honda prelude 2.0l
#1
Honda-Tech Member
Thread Starter
Join Date: Apr 2003
Location: Milwaukee, Wi, usa
Posts: 68
Likes: 0
Received 0 Likes
on
0 Posts
my dyno on my 90 honda prelude 2.0l
200.7 hp.......stock hp 135
198.6 tq........stock tq 130
10lbs
tdo3 .42ar
water to air intercooler (not working at the time)
weisco 8.0
SAFC @ +30%
vortec FMU
stock injectors and ignition
A/F @ 2500 rpm 16.1
.........4000 rpm 14.1
boost starts @ 2800
full boost @ 4000
red line 6500
I am very happy where i am currently with my set up. Except the little lean condition.
I have DSM injectors i need to install and i am currently looking for an ignition (MSD 6 BTM) and external waste gate (tial 38mm)
198.6 tq........stock tq 130
10lbs
tdo3 .42ar
water to air intercooler (not working at the time)
weisco 8.0
SAFC @ +30%
vortec FMU
stock injectors and ignition
A/F @ 2500 rpm 16.1
.........4000 rpm 14.1
boost starts @ 2800
full boost @ 4000
red line 6500
I am very happy where i am currently with my set up. Except the little lean condition.
I have DSM injectors i need to install and i am currently looking for an ignition (MSD 6 BTM) and external waste gate (tial 38mm)
#6
Re: my dyno on my 90 honda prelude 2.0l (teamlegacy)
He said weisco 8:1 pistons so I don't think it's stock. Regardless, with or without those pistons he's going to blow it up soon.
I suggest you go standalone or install those injectors with the safc hack before things start rattling.
I suggest you go standalone or install those injectors with the safc hack before things start rattling.
Thread
Thread Starter
Forum
Replies
Last Post
CBR
Honda Prelude
2
05-01-2004 09:40 AM