my cuziz turbo teg...
#3
Honda-Tech Member
Re: (PrettyLude)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by PrettyLude »</TD></TR><TR><TD CLASS="quote">that's manifold is gonna crack</TD></TR></TABLE>
im sure most everyone knws that by now... why waste your breath?
im sure most everyone knws that by now... why waste your breath?
#4
Who is Mr Robot?
iTrader: (2)
Join Date: Jul 2004
Location: ATL - Where the Pimps and Players dwell
Posts: 21,474
Likes: 0
Received 10 Likes
on
10 Posts
Re: (Dturbocivic)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by Dturbocivic »</TD></TR><TR><TD CLASS="quote">
im sure most everyone knws that by now... why waste your breath?</TD></TR></TABLE>
for his post count
looks like an ssac turbo too
im sure most everyone knws that by now... why waste your breath?</TD></TR></TABLE>
for his post count
looks like an ssac turbo too
#5
Thread Starter
Join Date: Mar 2004
Location: pittsburgh, pa, 15235
Posts: 215
Likes: 0
Received 0 Likes
on
0 Posts
Its turbonetics turbo and he got a new manifold. Ill post a pic later i put it in my other post in the integra forums. He got it for free and then he bought a new one.
Trending Topics
#8
Honda-Tech Member
Join Date: Oct 2002
Location: North San Jose, Ca
Posts: 2,501
Likes: 0
Received 0 Likes
on
0 Posts
Re: my cuziz turbo teg... (nitrousrush)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by nitrousrush »</TD></TR><TR><TD CLASS="quote">heres my cousins teg turbo thought you guys would want to check it out.
</TD></TR></TABLE>
AAAAAAAAAAAAAAAAAHAHAHAHAHAHAHAHAHHAHAHAHAAAAAAAAA AAAAHAHAHA
AAAAAAAAAAAHAHAHAHAHAHAHAHAHAHAHAHAHAHAHAHAAHAA
</TD></TR></TABLE>
AAAAAAAAAAAAAAAAAHAHAHAHAHAHAHAHAHHAHAHAHAAAAAAAAA AAAAHAHAHA
AAAAAAAAAAAHAHAHAHAHAHAHAHAHAHAHAHAHAHAHAHAAHAA
#9
Join Date: Oct 2003
Location: Bloomfield Hills, MI, USA
Posts: 1,124
Likes: 0
Received 0 Likes
on
0 Posts
Re: my cuziz turbo teg... (nitrousrush)
might wanna clean all that rust off the engine bay. also the battery looks pretty coroded. and good luck with that ssac mani.
#11
Thread Starter
Join Date: Mar 2004
Location: pittsburgh, pa, 15235
Posts: 215
Likes: 0
Received 0 Likes
on
0 Posts
Re: my cuziz turbo teg... (StolenTeg)
The whole thing is getting redone we have been to buissy with the turbo but ill post more pics in 2 hours... of the new manifold ..
#14
Honda-Tech Member
Join Date: Feb 2002
Location: 648 at 8,500
Posts: 2,937
Likes: 0
Received 0 Likes
on
0 Posts
Re: my cuziz turbo teg... (lone)
Man...you people bitch about anything. This is the FI forum not the "Do you htink my car needs to go to the body shop forum" I would rather drive a rusted boosted car than a non-rusted NA car. Function over form beotches. Lets see some of the haters cars.....
#15
Join Date: Jun 2002
Location: abbotsford, bc, canada
Posts: 741
Likes: 0
Received 0 Likes
on
0 Posts
Re: my cuziz turbo teg... (Kwuaymaikrup)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by Kwuaymaikrup »</TD></TR><TR><TD CLASS="quote">Man...you people bitch about anything. This is the FI forum not the "Do you htink my car needs to go to the body shop forum" I would rather drive a rusted boosted car than a non-rusted NA car. Function over form beotches. Lets see some of the haters cars..... </TD></TR></TABLE>
yeah no ****. its not "nice" unless its a b18c with a ramshorn and a sc63..
also if you idiots would look the manifold has the braces welded on.. open your ******* eyes.
yeah no ****. its not "nice" unless its a b18c with a ramshorn and a sc63..
also if you idiots would look the manifold has the braces welded on.. open your ******* eyes.
#16
iTrader: (2)
SSAC or not, who cares. They hold up on some apps, we have already found that out. Good luck with the other manifold and get some pics of it with the turbo installed on the manifold and stuff. Looks pretty good to start out with. No one will notice the rust, they are going to be staring at the turbo and front mount.
#17
Honda-Tech Member
Re: my cuziz turbo teg... (Kwuaymaikrup)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by Kwuaymaikrup »</TD></TR><TR><TD CLASS="quote">Man...you people bitch about anything. This is the FI forum not the "Do you think my car needs to go to the body shop forum" I would rather drive a rusted boosted car than a non-rusted NA car. Function over form beotches. Lets see some of the haters cars..... </TD></TR></TABLE>
Good thinking
Good thinking
#18
Member
Join Date: Nov 2004
Location: Newark, nj, united states
Posts: 1,040
Likes: 0
Received 0 Likes
on
0 Posts
Re: my cuziz turbo teg... (coocoo32)
If your cous needs a built head for his L/S look at this thread.
https://honda-tech.com/zerothread?id=1097842
I have tons of goodies
https://honda-tech.com/zerothread?id=1097842
I have tons of goodies
#20
Honda-Tech Member
iTrader: (2)
Join Date: May 2003
Posts: 4,284
Likes: 0
Received 0 Likes
on
0 Posts
Re: my cuziz turbo teg... (Kwuaymaikrup)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by Kwuaymaikrup »</TD></TR><TR><TD CLASS="quote">Man...you people bitch about anything. This is the FI forum not the "Do you htink my car needs to go to the body shop forum" I would rather drive a rusted boosted car than a non-rusted NA car. Function over form beotches. Lets see some of the haters cars..... </TD></TR></TABLE>
But then you sig says.........
WTB Clean DA integra in WA. or OR. CASH ON HAND!!!
If you dont care its cheaper to buy a rusty one.
But then you sig says.........
WTB Clean DA integra in WA. or OR. CASH ON HAND!!!
If you dont care its cheaper to buy a rusty one.
#21
Who is Mr Robot?
iTrader: (2)
Join Date: Jul 2004
Location: ATL - Where the Pimps and Players dwell
Posts: 21,474
Likes: 0
Received 10 Likes
on
10 Posts
Re: my cuziz turbo teg... (shortyz)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by shortyz »</TD></TR><TR><TD CLASS="quote">
yeah no ****. its not "nice" unless its a b18c with a ramshorn and a sc63..
also if you idiots would look the manifold has the braces welded on.. open your ******* eyes.</TD></TR></TABLE>
open yours, and prepare to open your mind.....
Stainless steel thermally expands and contracts, alot. By adding those braces between the collector (if you can call it that) you arent allowing the material to expand and contract, putting stress on it and eventually causing it to crack. removethose braces and brace the turbo to the block, then you have a decent manifold.
yeah no ****. its not "nice" unless its a b18c with a ramshorn and a sc63..
also if you idiots would look the manifold has the braces welded on.. open your ******* eyes.</TD></TR></TABLE>
open yours, and prepare to open your mind.....
Stainless steel thermally expands and contracts, alot. By adding those braces between the collector (if you can call it that) you arent allowing the material to expand and contract, putting stress on it and eventually causing it to crack. removethose braces and brace the turbo to the block, then you have a decent manifold.
#22
Junior Member
Join Date: Jan 2004
Location: Davie, FL, USA
Posts: 203
Likes: 0
Received 0 Likes
on
0 Posts
Re: my cuziz turbo teg... (wantboost)
Can you show better pics of the manifold braced to the block cause I have the same one and I am just going to keep it until I can afford another manifold. But mine is for a d-series.
#23
Who is Mr Robot?
iTrader: (2)
Join Date: Jul 2004
Location: ATL - Where the Pimps and Players dwell
Posts: 21,474
Likes: 0
Received 10 Likes
on
10 Posts
Re: my cuziz turbo teg... (DCivic00)
i hope slammd sol deosnt mind, but i took this photo from his site.
that bracehe made bolts to where his ac mount used to be. he adjusted the tension on the mani using stacks of washer, with this setup you cant unbolt the mani and the turbo wont move
that bracehe made bolts to where his ac mount used to be. he adjusted the tension on the mani using stacks of washer, with this setup you cant unbolt the mani and the turbo wont move
#24
Honda-Tech Member
Join Date: Jan 2003
Location: Penticton, BC, Canada
Posts: 2,593
Likes: 0
Received 0 Likes
on
0 Posts
Re: my cuziz turbo teg... (wantboost)
UGH this topic is beat around so much. bracing it like most people going from the turbo flange(on the manifold) to the head flange will not do ****, it will probably make things worse as previously stated. the picture just above my post is the proper way to do it. Bah screw ti I'm just gonna save this image so I can show it to everyone that always keeps bitching.